Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking
|
|||
|
|||
What screws to use for aluminum
"Ignoramus14135" wrote in message
.. . | I will need to fasten stuff to aluminum using 10-32 screws. That will | work in a dry environment (no dripping water) with sometimes high and | soemtimes low humidity (garage). | | Can I use regular shiny galvanized screws for this or would I have | galvanic corrosion issues and deal with stuck screws, later? | | i Well, if I guess right, you're going to be using these fasteners for bolting conductors together? Providing you keep it air/moisture tight, which most clean boltups are, then you shouldn't have an issue. Corrosion might be an issue under the bolt head, where the joint will be exposed. However, for your very mind environment, I wouldn't even worry about it. Spend your time thinking about more important things. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sheetmetal screws, chassis screws, fastening idears | Metalworking | |||
Help finding odd screws | Metalworking | |||
Those YUPPIE drywall screws | Home Repair | |||
Those YUPPIE drywall screws | Home Ownership | |||
CPU-socket (370) & cooling block: screws with springs, how tight? | Electronics Repair |