Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Using a welder for electroplating
"Ignoramus15120" wrote in message ... Is it possible to use a constant current DC welding machine for electroplating or derusting? Constant current is ideal for plating, anodizing and derusting -- if you can get the current low enough to be suitable for the job. |
#2
Posted to rec.crafts.metalworking
|
|||
|
|||
Using a welder for electroplating
replying to Don Foreman, S G wrote:
A friend uses 1000amp 6volt rectifier but that unit costs $7500 bucks, 3 phase 280v -- for full context, visit https://www.polytechforum.com/metalw...ng-453044-.htm |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Stryco blade welder | Metalworking | |||
Garage welder wiring questions | Metalworking | |||
Garage welder wiring questions | Metalworking | |||
Wiring my new 220 stick welder in my shop | Metalworking | |||
Welder | UK diy |