Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Cold saw blade speed
I was looking in the harbor freight catalog and found a 10" 156 tooth
cold saw blade for $11.99. That seems a bit on the low side the 10" 240 tooth is $69.99. What speed do these normaly run at? It seems like under 300 rpm. How much coolent do they require? |
#2
|
|||
|
|||
Cold saw blade speed
"Wayne Makowicki" wrote in message ink.net... I was looking in the harbor freight catalog and found a 10" 156 tooth cold saw blade for $11.99. That seems a bit on the low side the 10" 240 tooth is $69.99. What speed do these normaly run at? It seems like under 300 rpm. How much coolent do they require? The cold saw page shows 54 rpm for the blade....Paul http://www.harborfreight.com/cpi/cta...emnumber=47858 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
New Electrical Regulations | UK diy | |||
Japanese saw blade for knife blank? | Metalworking | |||
how do I ensure there is a cold water path to the boilers return | UK diy | |||
Knife Steel FAQ updated | Metalworking |