 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
BP spindle brake?
On both my J-heads, the spindle brake acts just the same. Push it forwards or
pull it back and it engages the brake, everything feels fine. In the manual, however, it says you can push/pull it and then lift it up and it will engage the lock mechanism, but on neither of mine does this happen. Is there an adjustment I can make, or are my brakes worn out or something? GWE |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| My lathe's spindle is too long for my new chuck | Woodturning | |||
| Jet-16 mill spindle brake? | Metalworking | |||
| Metal Working Machinery New and Used in Australia and for Export | Metalworking | |||
| Kelton Balancer Review Draft--long | Woodturning | |||
| Spindle wobble... | Metalworking | |||
Threaded Mode
