 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
crimping/bending aluminum tubing?
I need to crimp and bend some aluminum tubing in various places. I
might want to crimp the aluminum tubing and then bend it at the crimped point. I'm going to use those points for drilling and connecting to either small diameter metal rod or connecting two aluminum tubes together. I'm planning to buy a reasonable size vice and maybe attach half of a steel pipe to each jaw. Thank you. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Soldering aluminum tubing to steel sheet metal | Metalworking | |||
| Aluminum tubing | Metalworking | |||
| Too Much Flex in Aluminum Tubing | Metalworking | |||
| Putting an arc in aluminum tubing | Metalworking | |||
| on a side note: Putting a bend in 6061 aluminum tubing | Metalworking | |||
Threaded Mode
