Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Using a hole saw in a magnetic drilling machine
Hi all,
I talked to a guy this morning who suggested using a hole saw in a magnetic drilling machine. I need to cut some round holes between 2" and 3" diameter in 1/4" mild steel plate. The guy said I should be okay buying a smaller drilling machine with a broach capacity of 32 mm and using a hole saw to cut larger holes in 1/4" plate, rather than spending more on a big machine. I assume the saw arbor is held in a Jacob's chuck adaptor. Does anyone have experience of doing this? Does it work okay? Thoughts would be appreciated... Best wishes, Chris |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Using twist drill in magnetic drilling machine? | Metalworking | |||
Hole in my basement wall | Home Ownership | |||
Drilling floor tiles | UK diy | |||
Access Hole in Slab sealed but still causing musty smell-Help | Home Ownership | |||
Drilling metal control panel advice... | Metalworking |