Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
bandsaw
Bought an OLD Emerson power metal cutting bandsaw and been trying to
cut some 3 x 2 box bout 14 ga but can't get it to cut straight. I've adjusted the guides every way possible, but can't seem to get it right. Of course I don't have the manual. Anybody know how it should be done?? Thanks Ted |
#2
|
|||
|
|||
bandsaw
"Ted Cary" wrote in message om... Bought an OLD Emerson power metal cutting bandsaw and been trying to cut some 3 x 2 box bout 14 ga but can't get it to cut straight. I've adjusted the guides every way possible, but can't seem to get it right. Of course I don't have the manual. Anybody know how it should be done?? Thanks Ted Get a new blade! Lane |
#3
|
|||
|
|||
bandsaw
Get a new blade! Lane Have a brand new bimetal blade on it. |
#4
|
|||
|
|||
bandsaw
This site is specifically for the cheap 4x6 bandsaws but it talks about
cutting problems so it might give you some ideas. http://www.tinyisland.com/4x6bsFAQ.html Best Regards, Keith Marshall "I'm not grown up enough to be so old!" "Ted Cary" wrote in message om... Bought an OLD Emerson power metal cutting bandsaw and been trying to cut some 3 x 2 box bout 14 ga but can't get it to cut straight. I've adjusted the guides every way possible, but can't seem to get it right. Of course I don't have the manual. Anybody know how it should be done?? Thanks Ted |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tuning a Bandsaw | Metalworking | |||
Moving A Large Bandsaw | Metalworking | |||
vertical bandsaw question | Metalworking |