Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
bport -- powerfeed question
greets all..
having some trouble using/diagnosing the powerfeed on a Jhead bridgeport. i can get it to engage in both directions... "Up" has alot of power, i can't stop the quill by pulling on it. however, downfeed seems to kick out with little resistance. ie, using it to drill holes.. it'll feed down, but as soon as the bit touches the workpiece, out goes the powerfeed. anythoughts? is this thing broken? or am i not engaging it correctly? any help appreciated. -tony |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Condensing/combi boiler vs. pipework question | UK diy | |||
Sticky situation - adhesive question .. oh ha ha (sorry) | UK diy | |||
Simple question regarding Ceiling tiles and sound? | UK diy | |||
Plumbing Question | UK diy | |||
Pipe thread question, NPT vs NPSF, MIP, FIP and IPS | Metalworking |