Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Dave
 
Posts: n/a
Default Another "whatzit" guys..


This was found in a N. Ga barn. There are no impact marks on the heel,
and the "edge" is not nor has ever been sharpened. The loop is centered
axially. It looks to be either cast iron/steel, or drop forged judging
by the "seam".
I have only had a chance to photo this; spark test would be next,
unless one of ya'll can ID this:

http://bellsouthpwp.net/m/o/molly9/target0.html

Thanks!


~Dave,

Demo Smith Red Top Mtn. State Park

http://gastateparks.org/net/go/parks...id=21&siteid=5
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hi Guys. First Time Poster gerard702 UK diy 5 March 18th 05 07:25 PM
Hi Guys. First Time Poster efrain633 UK diy 4 March 18th 05 12:55 PM
Need advice from woodworking guys Janice Brown Woodworking 33 November 30th 04 02:14 PM
Need advice from woodworking guys Janice Brown Woodturning 27 November 27th 04 12:01 AM
HOW DO YOU GUYS FIGURE PROFIT? Jack-of-all-trades - JOAT Woodworking 26 September 29th 03 01:46 AM


All times are GMT +1. The time now is 03:27 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"