Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Starrett 823 ID Mic Thread Size
Does anyone know offhand what the thread size is for the extension
tubes on a Starrett 823 tubular ID mic? I've been doing some line boring, and want to make a C shaped anvil to straddle the bar to get accurate measurements. The solid rod ID mic works OK, but I have to go thru the bar at the 1/2" toolholder hole, and depending on the length of the bore, it's a pita to keep moving the setup. Also doesn't have a lot of clearance. I know, I know, I can measure the threads myself, but didn't have the bifocals with me sigh, getting older, or a magnifyer. I'm pretty sure I'll have to order a tap and die. Thanks, guys Ron |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Making a long threaded screw | Metalworking | |||
What hole size for 1/2-20 thread? | Metalworking | |||
Stripped Spindle Thread Help | Metalworking | |||
A different single-point threading question.... | Metalworking | |||
Copper pipe sizing. Is bigger better? | Home Repair |