Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
X-Y Crosstable Quality?
I'm not a machinest or metal worker.
I seek the opinions of the experts, please. I want to add a small (4 or 6") cross table vise to my drill press. I see similar tables all the way from $40 (Harbor Freight) to over $100 (Craftsman) and I would imagine there are some even more expensive versions. Are the Harbor Freight models junk? Do the higher priced styles have finer adjustment resolution? Are some made with magic dust? Thanks - L |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
For peer review, new FAQ section: Power Tools. Draft 2 | UK diy | |||
Quality of bathroom suits | UK diy | |||
Jointer vs Table saw cut quality | Woodworking | |||
Quality of Starret band saw blades--opinions | Metalworking | |||
Wall tiles: low quality print? | UK diy |