Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
New to hydraulics - question 1 of many
I am learning about hydraulics presently and am fascinated by their
simplicity and potential. There are a number of issues that are still unclear to me and I would be appreciative if someone could answer these questions if I post them here from time to time... The first being with regards to the hydraulic pump. It appears that 2200 PSI is a standard line pressure used in hydraulics, do all pumps produce this pressure with the variation between pumps being the flowrate or are all pumps basically the same with the flow rate and pressure being determined by the power source for the pump ? For example does a pump produce either high pressure at a low flow rate or low pressure at a high flow rate with the flow rate and pressure determined by the power source ? I understand that Thanks Murphy |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
To anyone sick of alt.hvac | Home Repair | |||
Hydraulics for backhoe thumb question | Metalworking | |||
OT Guns more Guns | Metalworking | |||
Plumbing Question | UK diy | |||
Question????? | Woodworking |