Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
How does a collet closer work?
Boss recently bought a Hardinge DV 59 and I can't get the thing to
close the collets. I tried two collets and after taking the thing apart I suspect something is missing. It appears to me that the three little fingers inside the adjusting ring should have a piece that force them up when the handle is pushed back to the closed position. One of these days we'll get a camera so I can post pictures instead of trying to explain things. Ken |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
problems w/ jacobs 900 series collet chuck, have questions - need answers | Metalworking | |||
Router collet sizes | UK diy | |||
SCFM vs. CFM, also air flow/pressure across a regulator | Metalworking | |||
Kelton Balancer Review Draft--long | Woodturning |