Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Article for newbie knifemakers
|
#2
|
|||
|
|||
"Renaldo" wrote in message
... Here's a link to an interesting article: http://www.everything2.com/index.pl?node_id=1727161 Not a bad article, but they forgot to mention that it'll be a WHOLE lot easier to drill holes in that metal with a Carbide bit... It's also a lot easier to cut the shape using a Dremel/Foredom/grinder using cut-off wheels... BTDT! |
#3
|
|||
|
|||
For the record: the damascus article on the same website is bull****.
Adam Smith Midland, ON "Renaldo" wrote in message ... Here's a link to an interesting article: http://www.everything2.com/index.pl?node_id=1727161 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Good galoot article in Harper's | Woodworking | |||
Help finding and old magazine article | Woodworking | |||
DO YOU WANT TO OBTAIN MANY DOLLARS? | Metalworking | |||
Article explaining why the lights went out | Metalworking |