Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Compatability Issue
Right then my second problem in as many days.
I'm in the process of making cherry dice cups/pots for a gaming group that I attend. I shall be finishing the edges with 1/4" brass angle. Because of the name of the group I want to put a copper plate 1 3/4" x 1 3/4" on the lid held down with the brass angle. This plate will be engraved with a Gryphon. Now I've heard some strange rumours about brass, copper and various reactions to other material. Is it OK to use these three together (Brass, copper and cherry) without causing discolouration? And if it is OK what's the best way to protect both the wood and metal after the lids return from the engravers. I'm used to carpentry and apart from screws & nails I rarely ever use metalwork. Many Thanks for any advice. TR |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Slightly off topic: Question, Wood magazine, #1 issue. Cut it or leave it alo | Woodworking | |||
Seeking Popular Woodworking Table Saw Issue | Woodworking | |||
OT Guns more Guns | Metalworking | |||
Today's Woodworker Issue 23 | Woodworking | |||
Popular Woodworking Magazine issue 100 | Woodworking |