 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#4
|
|||
|
|||
Turn the wheels full left and right and measure the camber change at each
position. The caster is 1/2 the difference if the wheels had turned to 90 degrees so you have to do some calculation there. Since you have one that hasn't been changed, you can compare between the two sides and make them equal. It is more important to have matched caster than an absolute value. -- Why isn't there an Ozone Hole at the NORTH Pole? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Front Door Threshold Stripping Question | Home Repair | |||
| Help on front bay window rotting out | Home Repair | |||
| OT Guns more Guns | Metalworking | |||
| Simple question regarding Ceiling tiles and sound? | Home Repair | |||
| Fridge freezer - how to remove top front panel (Bosch KGV3120GB/04 UK model) | UK diy | |||
Threaded Mode
