Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Ingersoll Rand Model B
I've seen lots of posts about air compressors on this ng so here goes. I've
picked up an old Ingersoll Rand Model B air compressor. It is a twin cylinder with a GE repulsion-induction dual voltage 3/4 hp motor. I believe I'm going to be able to get the motor working. It was running (motor) but not well. Also pumping a little air. I took it apart and it was so full of crud that some of the brushes were barely contacting the commutator. Big problem is the compressor unit. It offers very little resistance when turning by hand so it may need an overhaul. I spent quite a bit of time on Google and can't seem to find any sites dealing with parts for old models. I can't even find it listed anywhere. Anyone know of any good places for parts for these thinks? Thanks. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ingersoll Rand Compressor | Metalworking | |||
Opinions on Ingersoll Rand SS3L3 compressor? | Metalworking | |||
Anybody Got Experience With Ingersoll Rand IR107XP Air ratchet? | Metalworking | |||
Small compressor : DeWalt or Ingersoll | Woodworking |