Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Any ISOT members here?
In the 70's oilboom, the workers were called "oilfield trash" by onlookers.
An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve |
#2
|
|||
|
|||
"SteveB" wrote in message news:0CKme.1378$4p.91@fed1read03... In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Indirectly, I guess. Helicopter mechanic in Morgan City, La. for a couple years during that time. Also, Gambia, Qatar, Guyana supporting the Glomar Sirte. I'll bet you flew on the some of the ships I kept up. No t-shirt. Garrett Fulton |
#3
|
|||
|
|||
"gfulton" wrote Indirectly, I guess. Helicopter mechanic in Morgan City, La. for a couple years during that time. Also, Gambia, Qatar, Guyana supporting the Glomar Sirte. I'll bet you flew on the some of the ships I kept up. No t-shirt. Garrett Fulton Air Logistics or PHI? I always liked to see the 212s coming, because you were pretty sure to get a seat. And, like Radar on MASH, I could hear them before anyone else. Steve |
#4
|
|||
|
|||
"SteveB" wrote in message news:UY%me.1446$4p.1136@fed1read03... "gfulton" wrote Indirectly, I guess. Helicopter mechanic in Morgan City, La. for a couple years during that time. Also, Gambia, Qatar, Guyana supporting the Glomar Sirte. I'll bet you flew on the some of the ships I kept up. No t-shirt. Garrett Fulton Air Logistics or PHI? I always liked to see the 212s coming, because you were pretty sure to get a seat. And, like Radar on MASH, I could hear them before anyone else. Steve PHI and the 212's were what I worked on. Good strong machine and a pleasure to work on. No money in it, though. Garrett |
#5
|
|||
|
|||
"Garrett Fulton" wrote in message ... "SteveB" wrote in message news:UY%me.1446$4p.1136@fed1read03... "gfulton" wrote Indirectly, I guess. Helicopter mechanic in Morgan City, La. for a couple years during that time. Also, Gambia, Qatar, Guyana supporting the Glomar Sirte. I'll bet you flew on the some of the ships I kept up. No t-shirt. Garrett Fulton Air Logistics or PHI? I always liked to see the 212s coming, because you were pretty sure to get a seat. And, like Radar on MASH, I could hear them before anyone else. Steve PHI and the 212's were what I worked on. Good strong machine and a pleasure to work on. No money in it, though. Garrett I probably flew on ships you serviced. Thank you very much for the good work. Steve |
#6
|
|||
|
|||
SteveB wrote:
In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Well I did work the patch but never got a tee shirt . Really though never got a bad comments from anyone other then survey crews . Sort of a built in rivalry there . People generally thought I was making a fortune , ha ha . When I started they were paying roughnecks $4.10 an hour . Decent but sure no great fortune . They do a ton better today . Ken Cutt |
#7
|
|||
|
|||
"Ken Cutt" wrote Well I did work the patch but never got a tee shirt . Really though never got a bad comments from anyone other then survey crews . Sort of a built in rivalry there . People generally thought I was making a fortune , ha ha . When I started they were paying roughnecks $4.10 an hour . Decent but sure no great fortune . They do a ton better today . Ken Cutt I started off at $3.50 an hour. At that time, all you had to do to go offshore was have your bag packed. Today, with far less drilling, they can pick and choose their workers, and yes, they pay better now. Still a TOUGH job. Especially up on the drill floor. Steve |
#8
|
|||
|
|||
On Mon, 30 May 2005 13:22:22 -0700, "SteveB"
wrote: In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Gunner, raising his hand Bendix Geophysical, Western Geophysical, Cactus Drilling, Poole Well Services, General Production Services, Lund Production. "Considering the events of recent years, the world has a long way to go to regain its credibility and reputation with the US." unknown |
#9
|
|||
|
|||
Gunner, raising his hand Bendix Geophysical, Western Geophysical, Cactus Drilling, I moved rigs as a summer job when I was going to uni. Moved a few Catus rigs in Saskatchewan and Alberta. Were you there? Poole Well Services, General Production Services, Lund Production. "Considering the events of recent years, the world has a long way to go to regain its credibility and reputation with the US." unknown |
#10
|
|||
|
|||
"Tom Miller" wrote in message ... Gunner, raising his hand Bendix Geophysical, Western Geophysical, Cactus Drilling, I moved rigs as a summer job when I was going to uni. Moved a few Catus rigs in Saskatchewan and Alberta. Were you there? Poole Well Services, General Production Services, Lund Production. Did you know "Blondie" Bellard with Cactus? Steve |
#11
|
|||
|
|||
On Tue, 31 May 2005 09:10:40 -0700, "SteveB"
wrote: "Tom Miller" wrote in message ... Gunner, raising his hand Bendix Geophysical, Western Geophysical, Cactus Drilling, I moved rigs as a summer job when I was going to uni. Moved a few Catus rigs in Saskatchewan and Alberta. Were you there? Poole Well Services, General Production Services, Lund Production. Did you know "Blondie" Bellard with Cactus? Steve Its been nearly 30 yrs since I rode a rotary table for Cactus. All I remember is the rigs were red, they were out of El Dorado Arkansas. I do remember the blowouts, the rig that I was working derrick on that caught fire (blow out) while I was on the working board right after shift change (thank god for the geronimo line) and beating the mud guy to within an inch of his life for letting the water run in the pits while he was off chasing pussy during his shift... That sucker burned for 3 weeks. I worked for Cactus in Michigan in the gas fields in the early mid 70s. Gaylord fields. If I saw a picture of the guy..I might recognize him if he had ever been on my rig. Shrug. Gunner "Considering the events of recent years, the world has a long way to go to regain its credibility and reputation with the US." unknown |
#12
|
|||
|
|||
"SteveB" wrote in message news:000ne.1448$4p.417@fed1read03... "Tom Miller" wrote in message ... Gunner, raising his hand Bendix Geophysical, Western Geophysical, Cactus Drilling, I moved rigs as a summer job when I was going to uni. Moved a few Catus rigs in Saskatchewan and Alberta. Were you there? Poole Well Services, General Production Services, Lund Production. Did you know "Blondie" Bellard with Cactus? Steve Don't remember the name( It was thirty years ago) but we really didn't have that much to do with the rig crew usually. We'd just rock up at 5:00 AM and start tearing it out. With any luck, half the firts truck loads would be gone by noon. If it was a short move we'd be back in a couple of hours for another load. Didn't have much conversation time. The biggest customer was Precision Drilling who mostly has a bunch of crapped out 2 standers in those days. I believe that they have kicked on nicely now and a a real sharp operation. Moving rigs was hard work then and I suspect its still hard work. I can't see that there is any way to make a one inch winch line and tail chain any lighter or more flexible. Still, I enjoyed it at the time. Tom Miller |
#13
|
|||
|
|||
PS: I worked for Norman Jet systems, Global, and Gulf Coast Divers as a
diver, and for Reading and Bates as a crane operator. Steve |
#14
|
|||
|
|||
"SteveB" wrote in message news:J00ne.1449$4p.809@fed1read03... PS: I worked for Norman Jet systems, Global, and Gulf Coast Divers as a diver, and for Reading and Bates as a crane operator. Steve Well, while we're on this subject, I'd like to be able to understand an operation performed on a drilling rig. In '75, I was based onshore in Guyana maintaing a Bell 212 that serviced the Glomar Sirte. The ship was offshore about 90 miles and had drilled down to 14,000 ft., if I remember this right. I was on the ship during some type of cementing operation that was about to take place where, as far as I could understand it, they were preparing to pump liquid cement down the hole under high pressure. It would be forced out through the bottom of the hole, migrate up between the earth and the drill pipe, harden and stabilize the pipe in the earth. I didn't know beans about drilling wells, it wasn't my field, but that was the best I could understand it. We had an old Irish drilling engineer named Jake Murphy, who was a close friend, and was doing the computation for this operation. The Shell Oil big boss was named Harry TenApple and was roundly disliked by everyone. He really was a thoroughbred asshole as even I had had a run in with him. Right before the cementing operation, Harry told Jake he was taking over supervision of the deal. Jake went up on the bridge, got a notepad, wrote up a statement absolving himself of any responsibility for anything that was to occur subsequent to Harry taking over. Took it to Harry, and made him sign it. Harry blustered and fumed, but signed it. About an hour later, I heard that Harry had messed up the amount of hardener that was supposed to go in the cement mixture and plugged up the 14,000 ft. hole at the 10,000 ft. level. They later moved the ship over a short distance and had to start a new hole. That was the way it was all explained to me. Harry got canned off the job and Jake flew back with us and got roaring drunk and celebrated in the hotel until the wee hours. He was the sweetheart of the rodeo for letting Harry hang himself, I guess. Didn't have to buy any drinks. Anyhow, have I got this cementing operation correct? Is that the way it works? You have to be dead on the money with the amount of hardener? Garrett Fulton |
#15
|
|||
|
|||
"Garrett Fulton" wrote in message ... "SteveB" wrote in message news:J00ne.1449$4p.809@fed1read03... PS: I worked for Norman Jet systems, Global, and Gulf Coast Divers as a diver, and for Reading and Bates as a crane operator. Steve Well, while we're on this subject, I'd like to be able to understand an operation performed on a drilling rig. In '75, I was based onshore in Guyana maintaing a Bell 212 that serviced the Glomar Sirte. The ship was offshore about 90 miles and had drilled down to 14,000 ft., if I remember this right. I was on the ship during some type of cementing operation that was about to take place where, as far as I could understand it, they were preparing to pump liquid cement down the hole under high pressure. It would be forced out through the bottom of the hole, migrate up between the earth and the drill pipe, harden and stabilize the pipe in the earth. I didn't know beans about drilling wells, it wasn't my field, but that was the best I could understand it. We had an old Irish drilling engineer named Jake Murphy, who was a close friend, and was doing the computation for this operation. The Shell Oil big boss was named Harry TenApple and was roundly disliked by everyone. He really was a thoroughbred asshole as even I had had a run in with him. Right before the cementing operation, Harry told Jake he was taking over supervision of the deal. Jake went up on the bridge, got a notepad, wrote up a statement absolving himself of any responsibility for anything that was to occur subsequent to Harry taking over. Took it to Harry, and made him sign it. Harry blustered and fumed, but signed it. About an hour later, I heard that Harry had messed up the amount of hardener that was supposed to go in the cement mixture and plugged up the 14,000 ft. hole at the 10,000 ft. level. They later moved the ship over a short distance and had to start a new hole. That was the way it was all explained to me. Harry got canned off the job and Jake flew back with us and got roaring drunk and celebrated in the hotel until the wee hours. He was the sweetheart of the rodeo for letting Harry hang himself, I guess. Didn't have to buy any drinks. Anyhow, have I got this cementing operation correct? Is that the way it works? You have to be dead on the money with the amount of hardener? Garrett Fulton Yep. That's about right as I remember. I didn't have anything to do with calculating the hardener, so don't know about that. The drilling engineer used to come over and look at the calliper log to determine how much cement to run though. He'd just glance down the log and select a volume. Must have had divine assistance cause I sure couldn't have determined it from that. One point though, Its actually casing that they stabilize with cement. The drill pipe is out of the hole standing in the derrick. They case the hole with a larger diameter casing and cement it in. They then use a smaller bit to drill from the bottom of the casing to total depth. On some of the deep hole there would be three layers of casing between the formation & the drill pipe. |
#16
|
|||
|
|||
Gunner wrote:
On Mon, 30 May 2005 13:22:22 -0700, "SteveB" wrote: In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Gunner, raising his hand Bendix Geophysical, Western Geophysical, Cactus Drilling, Poole Well Services, General Production Services, Lund Production. "Considering the events of recent years, the world has a long way to go to regain its credibility and reputation with the US." unknown What - no Doodlebugs ? :-) Hope I spelled that right - the window decal is around here somewhere. Not a former member but knew them and some others that knew better. Martin Martin -- Martin Eastburn @ home at Lion's Lair with our computer lionslair at consolidated dot net NRA LOH, NRA Life NRA Second Amendment Task Force Charter Founder ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#17
|
|||
|
|||
On Tue, 31 May 2005 23:14:46 -0500, "lionslair at consolidated dot
net" "lionslair at consolidated dot net" wrote: Gunner wrote: On Mon, 30 May 2005 13:22:22 -0700, "SteveB" wrote: In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Gunner, raising his hand Bendix Geophysical, Western Geophysical, Cactus Drilling, Poole Well Services, General Production Services, Lund Production. "Considering the events of recent years, the world has a long way to go to regain its credibility and reputation with the US." unknown What - no Doodlebugs ? :-) Hope I spelled that right - the window decal is around here somewhere. Not a former member but knew them and some others that knew better. Martin Martin That was the time I spent working in 20 odd states and several countries "doodlebugging" on seismograph crews..Bendix and Western Geophysical. I ran a shot hole rig. Did some shooting, some observing, some jug hustling, even ran a tractor rig with a modified ditchwitch on the back to plant primacord underground in places we couldnt get a drill rig into. I liked the drilling down in the Brownsville area..we got to drill with air. Beat the hell out of standing over a mud pit in -50F weather outside of Sydney North Dakota and trying to keep from freezing to the ground between drill sections changes. Gunner "Considering the events of recent years, the world has a long way to go to regain its credibility and reputation with the US." unknown |
#18
|
|||
|
|||
Gunner wrote:
That was the time I spent working in 20 odd states and several countries "doodlebugging" on seismograph crews..Bendix and Western Geophysical. I ran a shot hole rig. Gunner, Can you fill me in on how a hole is profiled using a radioactive source? My wife and her sister are convinced that their father died (eventually) of radiation poisoning caused by an accident at a well. The story, as I heard it, was that he (working for Wellex/Halliburton in the 50's) was on a crew shooting a well. The drill hit a gas pocket and drill, pipe, and radioactive source were shot into the air. The container holding the radioactive source ruptured mid-air and covered the crew in a white powder. The crews' exposure badges were lost by Wellex. The guys on the crew were transferred to different areas of the country, and all died young from old age (the girls' father died at 47 fighting kidney, liver, and heart failure). I there any possibility that this could have happened? How hot is the radiation source? Or have the girls whipped up a conspiracy theory? Kevin Gallimore ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#19
|
|||
|
|||
axolotl wrote:
Gunner wrote: That was the time I spent working in 20 odd states and several countries "doodlebugging" on seismograph crews..Bendix and Western Geophysical. I ran a shot hole rig. Gunner, Can you fill me in on how a hole is profiled using a radioactive source? My wife and her sister are convinced that their father died (eventually) of radiation poisoning caused by an accident at a well. The story, as I heard it, was that he (working for Wellex/Halliburton in the 50's) was on a crew shooting a well. The drill hit a gas pocket and drill, pipe, and radioactive source were shot into the air. The container holding the radioactive source ruptured mid-air and covered the crew in a white powder. The crews' exposure badges were lost by Wellex. The guys on the crew were transferred to different areas of the country, and all died young from old age (the girls' father died at 47 fighting kidney, liver, and heart failure). I there any possibility that this could have happened? How hot is the radiation source? Or have the girls whipped up a conspiracy theory? I'm not Gunner, but I hung around the industry a little bit. I always thought that radioactive profiling was done with a wireline after the drill string was pulled. So it seems unlikely that the tool could have opened a gas pocket. It also seems unlikely that there would be enough source material to "cover the crew with white powder" and unlikely that it would break open. |
#20
|
|||
|
|||
Can you fill me in on how a hole is profiled using a radioactive source? My wife and her sister are convinced that their father died (eventually) of radiation poisoning caused by an accident at a well. The story, as I heard it, was that he (working for Wellex/Halliburton in the 50's) was on a crew shooting a well. The drill hit a gas pocket and drill, pipe, and radioactive source were shot into the air. The container holding the radioactive source ruptured mid-air and covered the crew in a white powder. The crews' exposure badges were lost by Wellex. The guys on the crew were transferred to different areas of the country, and all died young from old age (the girls' father died at 47 fighting kidney, liver, and heart failure). I there any possibility that this could have happened? How hot is the radiation source? Or have the girls whipped up a conspiracy theory? Kevin Gallimore I worked for Schlumberger much later (late 60"s early 70"s) so I suspect that the sources were less powerful by that time as the sensor technology had improved considerably by then. The most common radioactive survey when I worked for them ,measured the density of the formation by bombarding it with gamma rays from a cobalt 60 source. ( about 1 Curie if I remember correctly). The amount of radiation reflected back to the tool was measured and gave a measurement of the bulk density of the formation. If you knew the type of formation (sandstone or limestone were the only ones of interest as that is usually the only type you find oil or gas in) then you knew the density of the pure rock and could calculate the porosity of the formation. From resistivity surveys. you could tell weather the pore spaces were filled with water or oil or gas. Shooting a well is also called perforating. The well is cased with steel casing which is cemented into the hole from top to bottom. To allow the oil to flow into the hole, explosive shaped charges are located opposite the production zone and fired electrically from the surface. These blow holes about 12 mm in diameter through the pipe & cement and into the formation about a metre deep. I don't know if Wellex used some other technology in those days, but they were looked down on buy the Schlumberger engineers as a "poor cousin". Shclumberger was the acknowledged leader in the field. They did huge amounts of research, built all their own equipment in house,and never patented anything. They believed that they could stay 2 years ahead of their competitors and didn't give out any information. I had to sign all sorts of confidentiality agreements when I went to work for them. It seams kind of unlikely that they would have a radioactive source downhole while perforating as the sensors were really sensitive to shock. The Schlumberger sources were about 20 mm in diameter and maybe 100 mm long. They were a stainless steel tube with a Cobalt wire in them that was the actual source. I suspect that you could put them in a shotgun and shoot them at a wall without causing a leak. On the other hand, I heard rumours that a long time ago,(1950')somebody had found an earlier type of source on a lease in northern Alberta. They used to take the source out of the truck and place it in a roped off area on a corner of the lease. Some cat skinner found it and used it as a track pin punch and ruptured it. The source material was a powder in the case and contaminated himself and a big area. It was all supposed to have been hushed up. I don't know how true it was but it was one of those "oilpatch myths" that circulated. Schlumberger crews were chopped and changed and moved all over the country so the movement of the crew probably didn't have any sinister connotations. |
#21
|
|||
|
|||
On Wed, 01 Jun 2005 19:19:03 -0400, axolotl
wrote: Gunner wrote: That was the time I spent working in 20 odd states and several countries "doodlebugging" on seismograph crews..Bendix and Western Geophysical. I ran a shot hole rig. Gunner, Can you fill me in on how a hole is profiled using a radioactive source? My wife and her sister are convinced that their father died (eventually) of radiation poisoning caused by an accident at a well. The story, as I heard it, was that he (working for Wellex/Halliburton in the 50's) was on a crew shooting a well. The drill hit a gas pocket and drill, pipe, and radioactive source were shot into the air. The container holding the radioactive source ruptured mid-air and covered the crew in a white powder. The crews' exposure badges were lost by Wellex. The guys on the crew were transferred to different areas of the country, and all died young from old age (the girls' father died at 47 fighting kidney, liver, and heart failure). I there any possibility that this could have happened? How hot is the radiation source? Or have the girls whipped up a conspiracy theory? Kevin Gallimore Id have to say that at least a good portion of that story are bull****. As best as I know..radioactive logging is only done by lowering a source into a well and reading the bounced back radiation from detectors sheilded from the source. Like shining a flashlight at th walls of a tunnel. Every material will absorb more or less of the radiation "beam". Other forms of logging include reading the natural radioactivity of the subformations. http://www.greatgeophysics.com/logginginfo.html So the drill string is unlikely to have been in the hole. And if there was a gas pocket that came up, or a blow out even with the drill string in the hole..that container is the least of their problems..as having several thousand feet of heavy heavy pipe, mud and water coming out of the hole straight up....is not condusive to standing around for very long. Think of it as steel toothpaste...it flys upwards, bends and then starts kinking, bending and falling back down on the the drilling floor, the rig itself and the crew. Some of the radioactives that are used are pretty nasty stuff though. Based on what I know of the roughnecks of yore..dying at 47 was not all that unlikely..they lived hard, played hard..and died hard. On the gripping hand..there are lots of radioactives used in the pipeline industry for X-ray photographs of pipe weldments. Some of those can be pretty gnarly. Cesium-137 being one of them. Gunner ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- "Pax Americana is a philosophy. Hardly an empire. Making sure other people play nice and dont kill each other (and us) off in job lots is hardly empire building, particularly when you give them self determination under "play nice" rules. Think of it as having your older brother knock the **** out of you for torturing the cat." Gunner |
#22
|
|||
|
|||
I didn't work on rigs but I did haul a lot of oilfield stuff into and
out of the oil patch from 1974 to 1982. I was an O/O leased to H.J.Jeffries Truck Lines out of Oklahoma City. It was a great experience. I just wish I would have kept better notes about some of the characters I met and the stories I heard. It would be great material for a bestselling novel. Dennis |
#23
|
|||
|
|||
"SteveB" wrote in message
news:0CKme.1378$4p.91@fed1read03... In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Almost: went "legit" back in the '60s. Second Generation: Dad was an Engineer with Schlumberger from '46 'till he died in '59 and I worked in their Houston Headquarters from '65 - '68. I was working there when they created "Schlumberger Limited" and renamed their original operation "Schlumberger Well Services". |
#24
|
|||
|
|||
"RAM^3" wrote in message ... "SteveB" wrote in message news:0CKme.1378$4p.91@fed1read03... In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Almost: went "legit" back in the '60s. Second Generation: Dad was an Engineer with Schlumberger from '46 'till he died in '59 and I worked in their Houston Headquarters from '65 - '68. I was working there when they created "Schlumberger Limited" and renamed their original operation "Schlumberger Well Services". They had a reputation of being a fantastic company to work for in those days. They were good to work for in my day(early 70"s), but the old hands used to tell stories about how well the Schlumberger family used to treat them. They always went first class! Tom |
#25
|
|||
|
|||
"Tom Miller" wrote in message
... "RAM^3" wrote in message ... "SteveB" wrote in message news:0CKme.1378$4p.91@fed1read03... In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Almost: went "legit" back in the '60s. Second Generation: Dad was an Engineer with Schlumberger from '46 'till he died in '59 and I worked in their Houston Headquarters from '65 - '68. I was working there when they created "Schlumberger Limited" and renamed their original operation "Schlumberger Well Services". They had a reputation of being a fantastic company to work for in those days. They were good to work for in my day(early 70"s), but the old hands used to tell stories about how well the Schlumberger family used to treat them. They always went first class! Tom You can believe the oldtimers' stories. Pierre and Marcel were definitely on the "good guy" list although the kids were much more status-conscious. FWIW, I was, probably, the only kid that ever wanted his room painted "Schlumberger Blue" [with ~3" of white just below the white ceiling]. It's *still* my favorite color. -- "Sanity is *vastly* overrated - and rarely useful!" |
#26
|
|||
|
|||
"RAM^3" wrote in message ... "Tom Miller" wrote in message ... "RAM^3" wrote in message ... "SteveB" wrote in message news:0CKme.1378$4p.91@fed1read03... In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Almost: went "legit" back in the '60s. Second Generation: Dad was an Engineer with Schlumberger from '46 'till he died in '59 and I worked in their Houston Headquarters from '65 - '68. I was working there when they created "Schlumberger Limited" and renamed their original operation "Schlumberger Well Services". They had a reputation of being a fantastic company to work for in those days. They were good to work for in my day(early 70"s), but the old hands used to tell stories about how well the Schlumberger family used to treat them. They always went first class! Tom You can believe the oldtimers' stories. Pierre and Marcel were definitely on the "good guy" list although the kids were much more status-conscious. FWIW, I was, probably, the only kid that ever wanted his room painted "Schlumberger Blue" [with ~3" of white just below the white ceiling]. It's *still* my favorite color. -- "Sanity is *vastly* overrated - and rarely useful!" You could recognize the vehicles anywhere at half a mile distance |
#27
|
|||
|
|||
"Tom Miller" wrote in message
... "RAM^3" wrote in message ... "Tom Miller" wrote in message ... "RAM^3" wrote in message ... "SteveB" wrote in message news:0CKme.1378$4p.91@fed1read03... In the 70's oilboom, the workers were called "oilfield trash" by onlookers. An International Society was formed, and had belt buckles, hats, shirts, and all sorts of things. I have two belt buckles. I worked in the Gulf of Mexico from 1974 to 1980, then again in 1993, and a couple of hitches in Nigeria. Are there any other alumni here, or people who worked oilfield who didn't get to get a t shirt? Steve Almost: went "legit" back in the '60s. Second Generation: Dad was an Engineer with Schlumberger from '46 'till he died in '59 and I worked in their Houston Headquarters from '65 - '68. I was working there when they created "Schlumberger Limited" and renamed their original operation "Schlumberger Well Services". They had a reputation of being a fantastic company to work for in those days. They were good to work for in my day(early 70"s), but the old hands used to tell stories about how well the Schlumberger family used to treat them. They always went first class! Tom You can believe the oldtimers' stories. Pierre and Marcel were definitely on the "good guy" list although the kids were much more status-conscious. FWIW, I was, probably, the only kid that ever wanted his room painted "Schlumberger Blue" [with ~3" of white just below the white ceiling]. It's *still* my favorite color. -- "Sanity is *vastly* overrated - and rarely useful!" You could recognize the vehicles anywhere at half a mile distance Yep! Dark Blue with a White roof. That started in ~1955. Before that, until '52, they didn't issue company cars and, '52- '54, there was no color scheme. In '53 and '53 they issued Pontiacs and, in '54, they issued Mercurys. Dad always swore that the Oil Companies should have *given* those Mercuries away with the "catch" that the recipient buy all their gas from the donor: they were real gas hogs that used a lot of oil, too! In '55 he got a White/Blue Chevy and, in '57, he got his last car before he died - a White/Blue '57 Ford equipped with the latest Optional Safety Accessory: 3" wide seat belts with Aluminum Cam-Action buckles. [See? *Some* metal content here!G] |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Some questions for the LED savvy members | Metalworking | |||
FAQ for new list members | Woodworking | |||
OT-John Kerry | Metalworking | |||
Pearl Harbor | Metalworking | |||
An open request to all group members (In advance, we admit that this post could be considered commercial in nature) | Metalworking |