Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
GE RTV 664 if anyone needs it.
If anyone would like an 11 pound kit of RTV 664 I can get it delivered to you
for $210.00. Delivery time is typically 3 weeks. RTV664 is a platnum, addition cure RTV with a shore 60 durometer. It has zero shrink, and is one the highest tear RTV's around. Not recommended for deep undercuts.RTV 664 is a well kept secret. Not many people use it because they don't know it's out there, I won't use anything else unless I need to. You can't tear it unless it's very thin. It's especially good for parts that have mating halves. Tom |
#2
|
|||
|
|||
GE RTV 664 if anyone needs it.
NoSheeples wrote: If anyone would like an 11 pound kit of RTV 664 I can get it delivered to you for $210.00. Delivery time is typically 3 weeks. RTV664 is a platnum, addition cure RTV with a shore 60 durometer. It has zero shrink, and is one the highest tear RTV's around. Not recommended for deep undercuts.RTV 664 is a well kept secret. Not many people use it because they don't know it's out there, I won't use anything else unless I need to. You can't tear it unless it's very thin. It's especially good for parts that have mating halves. How old is it? Our experience is that it deteriorates after a year or so, and the properties after it has set are much poorer than when it is made from fresh material. Jon |
#3
|
|||
|
|||
GE RTV 664 if anyone needs it.
How old is it? Our experience is that it deteriorates after a year or
so, and the properties after it has set are much poorer than when it is made from fresh material. Jon It's 4 weeks old when I get it. RT664 has a shelf life of one year. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|