"Waynemak" wrote in message
...
Ok I have my delta surface grinder up and running all looks good. I did a
small test plate and it seems to do the job. I have never used a surface
grinder so any tips, how to, or DON'T does would be good. not sure how
fast
to feed, how much ect.



I strongly disagree with grinding instructions you've received. If my
opinion matters, here's a link
http://www.chaski.com/ubb/showthread...ssion&Number=6
5662&page=&view=&sb=5&o

that will take you to a site where grinding is currently being discussed.
My posts clearly state a procedure for grinding that is far superior, and
explains why. There is some very good information provided for anyone
that desires to learn to grind well.

Harold