 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
Mits Wire EDM Program Check Error
When we have a path that has 2 tangent arcs, the controller will give a
P70 arc error durring program check. Any ideas as to why? The controller is an fx. If no one knows, and good wire edm forums out there? |
|
#2
|
|||
|
|||
|
Ask over on alt.machines.cnc. Some pretty sharp cnc gurus hang out there.
Karl "SoCalMike" wrote in message oups.com... When we have a path that has 2 tangent arcs, the controller will give a P70 arc error durring program check. Any ideas as to why? The controller is an fx. If no one knows, and good wire edm forums out there? |
|
#3
|
|||
|
|||
|
When we have a path that has 2 tangent arcs, the controller will give a
P70 arc error durring program check. Any ideas as to why? I know some controls want a piece of straight line between 2 arcs... maybe even one of length zero... worth to try, anyway! |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Home made heat treating oven kiln: how to & Merry Xmas ! | Metalworking | |||
| Boreing Holes ? | Metalworking | |||
| testing ATX power supply | Electronics Repair | |||
| OT electrical question | Metalworking | |||
| what's the best way to wire money from oversea to buy house | Home Ownership | |||
Hybrid Mode
