Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Micro Marl 7X14 lathe delivery
I have an order in place for a Micro Mark 7X14 Lathe but have been told
it is on back order. Does anyone know where I could get one in the US, or alternatively the SIEG C3 which looks like the same lathe Thanks Bruce Murray MA |
#2
|
|||
|
|||
Bruce Murray wrote:
I have an order in place for a Micro Mark 7X14 Lathe but have been told it is on back order. Does anyone know where I could get one in the US, or alternatively the SIEG C3 which looks like the same lathe Thanks Bruce Murray MA I just got a Lathemaster 8x14 lathe. Here is a link to a site with a picture of a Grizzly 7x12 sitting next to a Lathemaster 8x14. it's the 7th picture down. http://www.tedatum.com/thms/lathemaster.html When I got mine he had a few 8x14's and a few 8x30's left. On their (lathemaster) website, it says they are out of stock but, you'll need to call bob at lathemaster to find out what he has left. http://www.lathemaster.com/ Jack |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
lathe - metal or wood? | Woodworking | |||
Unimat Micro Lathe - Source wanted | Metalworking | |||
micro lathe | Metalworking | |||
Hobby shops with micro lathe and mill equipment? | Metalworking | |||
Kelton Balancer Review Draft--long | Woodturning |