Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Efficiency & Savings For A New Forced Gas Hot Air System ?
Hello:
Realize that this is a question that is probably impossible to answer with any real accuracy, but was wondering if anyone would care to offer any estimate, or guestimate, on it: For a 25 year old typical three bedroom split level (in the Northeast) using the original forced gas hot air system for heat, what % "might" be saved in going to a brand new ("top-of-the-line") furnace in ones heating bill ? Thanks, Bob |
#2
|
|||
|
|||
How much are you paying now?
BTU of your current system? |
#3
|
|||
|
|||
The answer will depend alot on whether or not it is turned on after it
is installed. Also, I have found the the best way to really save on energy costs is to buck the system, and use your cooling in the winter and heating in the summer. So far this year, I have only had to turn on my cooling system 4 times, when the temp got above 40. |
#4
|
|||
|
|||
"Robert11" wrote in message ... Hello: Realize that this is a question that is probably impossible to answer with any real accuracy, but was wondering if anyone would care to offer any estimate, or guestimate, on it: For a 25 year old typical three bedroom split level (in the Northeast) using the original forced gas hot air system for heat, what % "might" be saved in going to a brand new ("top-of-the-line") furnace in ones heating bill ? Thanks, Bob To many variables to answer try this site and see if it helps you decide http://198.147.238.24/ac_calc/default.asp |
#5
|
|||
|
|||
Is it one of those 50%-60 % efficient monsters with the round burner
chamber. Is it oversized heating you a bit to fast and uneven, Has it been maintained and has a good blue flame or is it yellow. Does it have an AC coil in the heatpath that could be clogged. You need to know what you have now, is it running at 30% or 70% efficiency. You can go to 94.5% and get VS DC motor that will cut electrical usage by 50-60% |
#6
|
|||
|
|||
assuming its got decent insulation and all, i would expect enough to pay for
itself over its lifespan and then some. hey, you wanted a guess... randy "Robert11" wrote in message ... Hello: Realize that this is a question that is probably impossible to answer with any real accuracy, but was wondering if anyone would care to offer any estimate, or guestimate, on it: For a 25 year old typical three bedroom split level (in the Northeast) using the original forced gas hot air system for heat, what % "might" be saved in going to a brand new ("top-of-the-line") furnace in ones heating bill ? Thanks, Bob |
#7
|
|||
|
|||
"Robert11" wrote in message ... Hello: Realize that this is a question that is probably impossible to answer with any real accuracy, but was wondering if anyone would care to offer any estimate, or guestimate, on it: For a 25 year old typical three bedroom split level (in the Northeast) using the original forced gas hot air system for heat, what % "might" be saved in going to a brand new ("top-of-the-line") furnace in ones heating bill ? Thanks, Bob Your old furnace is approx 60%, the best new condensing furnaces are 92% or more Check here for savings and make sure your insulation and windows are efficient. http://www.indgasassoc.org/sites/igs.nsf/page/furnace |
#8
|
|||
|
|||
An old furnace can get as low as 50 or 60% efficient, plus having a heavier
fan to blow the air, so more electric. The new furnaces can be over 90% efficient, and lighter fans. Can't give you any specifics, but my boss and I put in one, the power company bumped up his estimated ammount cause it was a cold year. He called adn told them he had a new furnace, but they left the estimate. He had a zero gas bill one month cause they estimated too far in advance. -- Christopher A. Young Learn more about Jesus www.lds.org www.mormons.com "Robert11" wrote in message ... Hello: Realize that this is a question that is probably impossible to answer with any real accuracy, but was wondering if anyone would care to offer any estimate, or guestimate, on it: For a 25 year old typical three bedroom split level (in the Northeast) using the original forced gas hot air system for heat, what % "might" be saved in going to a brand new ("top-of-the-line") furnace in ones heating bill ? Thanks, Bob |
#9
|
|||
|
|||
The issue is if he is paying $60/month during 3 winter month,
$20 saving will not pay for new furnace.... If his bill is $400/month let's say $100/month saving well worth it. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sealed heating system design/conversion - Cue Ed or Andy H | UK diy | |||
Forced Hot Water Heating System: What Temp Limits,, And What Should Pressure Be At Limits ? | Home Repair | |||
more fun with air conditioning | Home Ownership | |||
Ohmwork | Home Repair | |||
Bowl Saving: A Comprehensive Discussion | Woodturning |