Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Drilling cast iron?
I have a table saw with two stamped metal wings.
I found a cast iron table from an old saw at a garage sale for $3. Cleaned up it should make a great wing. Unfortunately it only has holes on three sides, and I need them on all four. (Since both it an my saw are craftsman, I am hoping the other holes line up, but better check before I do any new drilling...) Any advice on drilling additional holes? I have an industrial drill and a big pile of drill bits I got when a tool shop went out of business, but it looks pretty thick. I know I have to keep oil on the surface, anything else? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Drilling into Cast Iron - 21/64" | Home Repair | |||
drilling cast iron? | UK diy | |||
Wrought Iron, Cast Alum and Cast Iron Decorative welding | Metalworking | |||
Cast Iron sewer -- Is it a hazard? | Home Repair | |||
Cast Iron sewer -- Is it a hazard? | Home Ownership |