Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
GE Profile Dishwasher error code "2h"
replying to h, Bruce Kemfort wrote:
Once you see a 1H,2H,3H etc. etc. All the way up to the 12H . Here are the steps necessary to clear the timer. The H means there was a delay start set on dishwasher from one hour to 12 hrs. To clear if the start button and light is on for unit, the unit or dishwasher and light must be off to proceed. After you successfully turn the start button off hold down the delay start button and leave off and code will change from 2H to 3H or from 3H to 4H, you need to keep cycling till you reach 12H press and hold the delay timer button one more time and the minutes will appear on the display. Press the start button and close the door, your dishwasher should start. -- for full context, visit https://www.homeownershub.com/mainte...2h-442481-.htm |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
GE Profile Dishwasher error code "2h" | Home Repair | |||
Dishwasher error says 'filling fault' but it fills (Baumatic BDW10, error code E1) | UK diy | |||
is there vender error and good error | Electronics | |||
GE Profile Dishwasher not cleaning properly | Home Repair | |||
GE Profile Dishwasher Problem | Home Repair |