Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Steve Smith
 
Posts: n/a
Default Cast Iron sewer -- Is it a hazard?

Greetings,

I am hoping that some of the knowledgeable people on this group can
answer some questions regarding older cast iron drain stacks. Some months
ago our insurance was non-renewed because the insurance company refuses to
insure homes with cast iron in them. The reason given for this rule is that
they "rot out from within and burst", we weren't even covered for sewer
backup/breakout under that policy anyways. Fast forward to now, we have a
new insurance company (a farm mutual), and their inspector didn't even note
the cast iron drains even though he knew that was why the other company had
dropped us.

Right now we are in the middle of renovations, and incidentally the
walls
that contain the stack are being re-cladded with drywall and as thus the
stack is currently fully exposed from basement to attic. If we were to
replace the cast iron with ABS, now would be the time to do it however I
doubt this is a task I could do myself. I imagine the cast iron is heavy
(even if half of it has rotted away) and well... it would not be a pleasant
job. I have received a quote to replace it (materials+labour) for about
$900.

So the question has become, is it worth replacing? Is it really going
to spring a leak someday? Is it going to 'burst' like the first insurance
company said, or will it start as a slow leak and progress?

Some details: The total vertical section of the pipe is about 2 stories
plus attic, the pipe becomes horizontal at the basement ceiling and runs for
about 15' until it drops down about a foot to the cast iron sewer that goes
out to the septic tank. The pipe is probably about 50+ years old.

Thanks in advance

-- Steve

Note: Change TwoThousandAndThree into the proper numerical form to reply to
me via email.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wrought Iron, Cast Alum and Cast Iron Decorative welding Roy Metalworking 7 April 30th 04 08:52 AM
Bench Vise Questions (Steel vs. Iron) x Metalworking 2 September 1st 03 04:50 PM
Replacing cast iron DWV stack pipe Alexander Galkin Home Repair 2 August 11th 03 03:03 PM


All times are GMT +1. The time now is 08:36 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"