Home |
Search |
Today's Posts |
![]() |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
I would be worried about that tree first. Grinding down the roots are
not going to get rind of them, even cutting them will not get rid of them Either the tree is going to die or with that root cut topple in the wind or just die. Get a tree person to resolve that problem first. Then you have the other problem. The prices may be ok, considering they have to get rid of what is there, dig out enough to make a new solid foundation and then replace the concrete. The bids should have told you how thick they were going to pour and how they were going to prepare the foundation. I personally would want it reinforced, but many people are successful without reinforcement. -- Joseph E. Meehan 26 + 6 = 1 It's Irish Math "Zemedelec" wrote in message ... I have an extremely short section of cement driveway (from the street, upwards at a slight angle to cross the sidewalk, to my gate--after which it changes into a two parallel cement tracks for wheels, which are OK. It's about 12 feet long, 6-7 wide. ) Since I have a low-slung car (and to prevent myself and others from falling while crossing this area) I want it replaced. When I bought the house some of this section had already separated into separate, very thick chunks, a couple of which were even heaved to the side so the dirt beneath could be seen. I've had two bids from independent workers. One said the roots of a nearby oak were pushing up the cement and would have to be ground down before he could pour, and wanted "maybe $800." The other mentioned wire netting, rebar, etc. as well as root grinding and cement and wanted $1,100. This seems like a lot of money for a rather small job, and it's in an area (New Orleans) where prices can vary widely for the same work--not necessarily in reference to the quality of the work or materials but sometimes simply because the worker thinks you don't know what the median price is. Feedback, please! zemedelec |
#2
![]() |
|||
|
|||
![]()
Zemedelec wrote:
I have an extremely short section of cement driveway (from the street, upwards at a slight angle to cross the sidewalk, to my gate--after which it changes into a two parallel cement tracks for wheels, which are OK. It's about 12 feet long, 6-7 wide. ) Since I have a low-slung car (and to prevent myself and others from falling while crossing this area) I want it replaced. When I bought the house some of this section had already separated into separate, very thick chunks, a couple of which were even heaved to the side so the dirt beneath could be seen. I've had two bids from independent workers. One said the roots of a nearby oak were pushing up the cement and would have to be ground down before he could pour, and wanted "maybe $800." The other mentioned wire netting, rebar, etc. as well as root grinding and cement and wanted $1,100. This seems like a lot of money for a rather small job, and it's in an area (New Orleans) where prices can vary widely for the same work--not necessarily in reference to the quality of the work or materials but sometimes simply because the worker thinks you don't know what the median price is. Feedback, please! zemedelec just keep shooting for a bid for a lower price.. they will come around... but dont expect someone to go so low that you know they gonna rip you off.. a friend who was in the grass cutting business years ago got a call one sunday morning to go out and give a price on some grass cutting... the customer shows him a back yard with about 18 in. high st. augustine grass there and has a pretty big back yard... the friend tells him $60.00 for the job... the customer goes crazy and starts telling my friend that he used to get a guy to come out and cut the grass for two dollars.... my friend then says: and you called me to out bid him..... the friend told me that the guy agreed to the $60.00 price and that he had to use his riding tractor to go over the back yard about three times to get the grass down so he could use a walk behind mower... he told me that if he knew it was that hard he would have never done the yard for any price...... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Any Ideas For Organizing A Contractors Work Van? | Woodworking | |||
"Part P in force by 2004" | UK diy | |||
Salary-VS-Hourly $ 15.00 hr (50 hrs+) Salary with bonus??? hard decision | Woodworking | |||
Moisture Cure Urethane (Moisture Cured Urethane) | Woodworking | |||
Another toolkit question | UK diy |