I just returned from vacation and found the 20amp circuit breaker
tripped that my hayward pool filter is plugged into. I inspected the
filter and found a ton of tree seedlings clogging the basket and
filter. I cleaned both, reset the breaker and turned the filter on.
The filter cycles on and then off about every second for about 10
seconds and then blows the breaker again. Did the pump over heat while
I was on vacation and damage something?

Any help would be appreciated,
Thanks,
Ken

Ken writes:

The filter cycles on and then off about every second for about 10
seconds and then blows the breaker again. Did the pump over heat while
I was on vacation and damage something?

If the motor is not starting, check the starting capacitor first, if it has
one. The motor is not cooled by water flow.