Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
Hello, all. I've got an ~8 year old GE brand answering machine (like
this one: http://www.amazon.com/GE-29878GE1-Di.../dp/B00005NGRH) that has worked flawlessly until about a month ago when the machine announced "Low battery". As usual I replaced the 9v batt with a fresh one and the announcement was gone. The next day I got the message again. Took out the battery and checked with a VOM (yea I know it wasn't under load) and the terminal voltage was only about 6 volts. Put in another fresh battery and got the same results after a day. Prior to all this the battery would last for at least a year without needing to be replaced. In all other respects the device works fine but with a nearly exhausted (or no battery) the box resets to defaults if the power from the wall wart adapter is interrupted. Any ideas what could be pulling the battery prematurely low? Thanks for your time and comment. Sincerely, -- J. B. Wood e-mail: |
#2
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
On 5/24/2016 6:24 AM, J.B. Wood wrote:
Hello, all. I've got an ~8 year old GE brand answering machine (like this one: http://www.amazon.com/GE-29878GE1-Di.../dp/B00005NGRH) that has worked flawlessly until about a month ago when the machine announced "Low battery". As usual I replaced the 9v batt with a fresh one and the announcement was gone. The next day I got the message again. Took out the battery and checked with a VOM (yea I know it wasn't under load) and the terminal voltage was only about 6 volts. Put in another fresh battery and got the same results after a day. Prior to all this the battery would last for at least a year without needing to be replaced. In all other respects the device works fine but with a nearly exhausted (or no battery) the box resets to defaults if the power from the wall wart adapter is interrupted. Any ideas what could be pulling the battery prematurely low? Thanks for your time and comment. Sincerely, At the risk of being simple minded, I see a couple posible reasons: 1) Low quality battery, doesn't have much energy to begin with. 1a) You do use alkalines, yes? 2) Problem with the machine, excess current draw. Possibly dried out capacitor. 2a) I don't know the normal current draw. But with a VOM and devices using 9 volt battery clips, not hard to check current draw. .. Christopher A. Young You do learn more about Jesus, yes? .. www.lds.org (Lots of power.) .. .. |
#3
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
On 05/24/2016 07:22 AM, Stormin Mormon wrote:
At the risk of being simple minded, I see a couple posible reasons: 1) Low quality battery, doesn't have much energy to begin with. 1a) You do use alkalines, yes? 2) Problem with the machine, excess current draw. Possibly dried out capacitor. 2a) I don't know the normal current draw. But with a VOM and devices using 9 volt battery clips, not hard to check current draw. Thanks for the quick turnaround, Stormin. (So use to you being over at the locksmithing ng.) I did try fresh 9V alkalines. I wouldn't think a dried-out cap would be a problem, but what about a leaky cap? A VOM in series with the batt connected to the answering machine indicated a current draw of less than 1 mA with the AC adapter connected. I'm wondering why there should be any current drawn from the batt when powering from AC. Sincerely, -- J. B. Wood e-mail: |
#4
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
I can believe that the battery would run down if it is being used. Check
to see if the machine is plugged in and getting electricity. Maybe a bad socket? Dave M. |
#5
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
On 5/24/2016 7:37 AM, J.B. Wood wrote:
On 05/24/2016 07:22 AM, Stormin Mormon wrote: At the risk of being simple minded, I see a couple posible reasons: 1) Low quality battery, doesn't have much energy to begin with. 1a) You do use alkalines, yes? 2) Problem with the machine, excess current draw. Possibly dried out capacitor. 2a) I don't know the normal current draw. But with a VOM and devices using 9 volt battery clips, not hard to check current draw. Thanks for the quick turnaround, Stormin. (So use to you being over at the locksmithing ng.) I did try fresh 9V alkalines. I wouldn't think a dried-out cap would be a problem, but what about a leaky cap? A VOM in series with the batt connected to the answering machine indicated a current draw of less than 1 mA with the AC adapter connected. I'm wondering why there should be any current drawn from the batt when powering from AC. Sincerely, Quite all right. Woke up, check the messages, and there you are! I still follow the locksmith NG, but much less action there. I'm unsure about dried out or leaky cap. The one man I know who would instantly be able to answer that.... died about a month ago. Also don't know about the 1 mA current draw. Wish I were more help. -- .. Christopher A. Young learn more about Jesus .. www.lds.org .. .. |
#6
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
On 05/24/2016 07:58 AM, David L. Martel wrote:
I can believe that the battery would run down if it is being used. Check to see if the machine is plugged in and getting electricity. Maybe a bad socket? Dave M. Hello, and the device won't operate on battery alone. The battery is just a backup to maintain the user-specified configuration in memory in case of AC power outage. Sincerely, -- J. B. Wood e-mail: |
#7
Posted to alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
On Tuesday, May 24, 2016 at 8:27:25 AM UTC-4, J.B. Wood wrote:
On 05/24/2016 07:58 AM, David L. Martel wrote: I can believe that the battery would run down if it is being used. Check to see if the machine is plugged in and getting electricity. Maybe a bad socket? Dave M. Hello, and the device won't operate on battery alone. The battery is just a backup to maintain the user-specified configuration in memory in case of AC power outage. Sincerely, -- J. B. Wood e-mail: with wallmart selling a brand new at&t answering machine for under 15 bucks its not worth messing with...... |
#8
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
In article ,
"J.B. Wood" wrote: On 05/24/2016 07:22 AM, Stormin Mormon wrote: At the risk of being simple minded, I see a couple posible reasons: 1) Low quality battery, doesn't have much energy to begin with. 1a) You do use alkalines, yes? 2) Problem with the machine, excess current draw. Possibly dried out capacitor. 2a) I don't know the normal current draw. But with a VOM and devices using 9 volt battery clips, not hard to check current draw. Thanks for the quick turnaround, Stormin. (So use to you being over at the locksmithing ng.) I did try fresh 9V alkalines. I wouldn't think a dried-out cap would be a problem, but what about a leaky cap? A VOM in series with the batt connected to the answering machine indicated a current draw of less than 1 mA with the AC adapter connected. I'm wondering why there should be any current drawn from the batt when powering from AC. Sincerely, J. B.- I would expect there to be an isolation diode between the battery and the AC adapter's power. I can think of three possibilities: 1. The diode is shorted, so power from the AC adapter is ruining the backup battery. 2. There is a leaky electrolytic capacitor on the battery side of the diode. Check current draw from the battery with the AC adapter disconnected. 3. The AC adapter has failed, so the device is being powered entirely from the battery. Does it work with the battery removed? Fred |
#9
Posted to sci.electronics.repair,alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
On 05/24/2016 01:21 PM, Fred McKenzie wrote:
I would expect there to be an isolation diode between the battery and the AC adapter's power. I can think of three possibilities: 1. The diode is shorted, so power from the AC adapter is ruining the backup battery. 2. There is a leaky electrolytic capacitor on the battery side of the diode. Check current draw from the battery with the AC adapter disconnected. 3. The AC adapter has failed, so the device is being powered entirely from the battery. Does it work with the battery removed? Fred Thanks for the reply. Wrt to 3) the battery provides for retaining the user-specified configuration (outgoing message, current time/date, etc) in memory in case of an AC power outage; the unit still requires the AC adapter to operate with or without a battery installed. Without a battery (or too low a battery) the unit will reset to its out-of-the-box defaults following an AC power interruption. Just like a lot of those bedside LED alarm clocks with battery-backup. Sincerely, -- J. B. Wood e-mail: |
#10
Posted to alt.home.repair
|
|||
|
|||
Answering Machine Backup Batt
bob haller posted for all of us...
On Tuesday, May 24, 2016 at 8:27:25 AM UTC-4, J.B. Wood wrote: On 05/24/2016 07:58 AM, David L. Martel wrote: I can believe that the battery would run down if it is being used. Check to see if the machine is plugged in and getting electricity. Maybe a bad socket? Dave M. Hello, and the device won't operate on battery alone. The battery is just a backup to maintain the user-specified configuration in memory in case of AC power outage. Sincerely, -- J. B. Wood e-mail: with wallmart selling a brand new at&t answering machine for under 15 bucks its not worth messing with...... +1 I happen to agree with Bob on this. Also technology has improved: range, handset battery life, will work off handset battery if left in master dock, more handsets, clearer. The most important one to me is one button blocking of unwanted callers. Mine has 256 or so. I prefer Panasonic, the older system I had still worked but did not have enough blocking capacity. The only downside is porting your phonebook to the new one... I got it at Staples... (if that means anything) -- Tekkie |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Answering Machine Backup Batt | Electronics Repair | |||
answering Machine Backup Up | Electronics Repair | |||
SOMEBODY CALLED MICHAEL TERRELL AND SAID "I LOVE YOU RUUD" ON HISANSWERING MACHINE SO HE SET HIS ANSWERING MACHINE ON FIRE WITH ACETONE. | Electronics Repair | |||
Answering Machine | Electronics Repair | |||
Help! Trying to get a fax machine working with an answering machine/PABX | UK diy |