Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to
bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement"! But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. |
#2
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
Don Y wrote:
I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement"! But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. You want contact cement . Try to get the solvent based , the latex stuff (at least in years past) is junk . -- Snag |
#3
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On 10/11/2015 8:09 PM, Terry Coombs wrote:
Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. You want contact cement . Try to get the solvent based , the latex stuff (at least in years past) is junk . Thx! |
#4
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On 10/11/2015 8:09 PM, Terry Coombs wrote:
Don Y wrote: Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. You want contact cement . Try to get the solvent based , the latex stuff (at least in years past) is junk . Visited a larger, well stocked hardware store this morning. I.e., they have a "glue aisle". After reading labels, selected what *I* thought would be the best product. Sales droid, unaware of my selection, then selected the same product. Tried this on returning home. Perfect! Those pieces will never be coming apart, now! Though product claims it should cure for many *days* (WTF?!). Having *finished* the job, read the label more thoroughly and note that it calls itself a "contact adhesive". (sure dries *fast*, though) Thanks, again! |
#5
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On Mon, 12 Oct 2015 11:00:48 -0700, Don Y
wrote: Visited a larger, well stocked hardware store this morning. I.e., they have a "glue aisle". After reading labels, selected what *I* thought would be the best product. Sales droid, unaware of my selection, then selected the same product. Tried this on returning home. Perfect! Those pieces will never be coming apart, now! Though product claims it should cure for many *days* (WTF?!). Having *finished* the job, read the label more thoroughly and note that it calls itself a "contact adhesive". (sure dries *fast*, though) Wonder if it has a brand name or is it double top secret? |
#6
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On Mon, 12 Oct 2015 11:27:02 -0700, Oren wrote:
On Mon, 12 Oct 2015 11:00:48 -0700, Don Y wrote: Visited a larger, well stocked hardware store this morning. I.e., they have a "glue aisle". After reading labels, selected what *I* thought would be the best product. Sales droid, unaware of my selection, then selected the same product. Tried this on returning home. Perfect! Those pieces will never be coming apart, now! Though product claims it should cure for many *days* (WTF?!). Having *finished* the job, read the label more thoroughly and note that it calls itself a "contact adhesive". (sure dries *fast*, though) Wonder if it has a brand name or is it double top secret? I used to use "Plyobond" for a lot of that kind of use, years ago. Not sure if it is still available. Found it was tougher than Lepages "contact cement" |
#7
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
|
#8
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
|
#9
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
Oren posted for all of us...
On Mon, 12 Oct 2015 11:00:48 -0700, Don Y wrote: Visited a larger, well stocked hardware store this morning. I.e., they have a "glue aisle". After reading labels, selected what *I* thought would be the best product. Sales droid, unaware of my selection, then selected the same product. Tried this on returning home. Perfect! Those pieces will never be coming apart, now! Though product claims it should cure for many *days* (WTF?!). Having *finished* the job, read the label more thoroughly and note that it calls itself a "contact adhesive". (sure dries *fast*, though) Wonder if it has a brand name or is it double top secret? Only the dean knows... -- Tekkie |
#10
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
Don Y wrote:
I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement"! But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. My experiance has been that contact cement softens and fails at higher temps. Try superglue on a sample. I have had good results with it for several rubber type compounds. |
#11
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On Sun, 11 Oct 2015 20:22:13 -0700, "Bob F"
wrote: Don Y wrote: I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement"! But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. My experiance has been that contact cement softens and fails at higher temps. Try superglue on a sample. I have had good results with it for several rubber type compounds. There is a product called "last glue" - very much like superglue, but designed for bonding "O"ring material etc. I've never had any luck with "crazy glue", but this stuff is FANTASTIC.. Bonds virtually anything to anything and is not a "brittle bond" |
#12
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
|
#13
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement" But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. There is a product called "last glue" - very much like superglue, but designed for bonding "O"ring material etc. I've never had any luck with "crazy glue", but this stuff is FANTASTIC.. Bonds virtually anything to anything and is not a "brittle bond" Clare's suggested product - a new one on me - but sounds good. https://www.thelastglue.com/products/ My first thought was the rubber cement used for patching inner tubes. Also - an old web site was once dedicated to gluing - http://www.thistothat.com/ John T. --- news://freenews.netfront.net/ - complaints: --- |
#14
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
How thick are these sheets? Maybe you could try sewing them together.
|
#15
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On Sunday, October 11, 2015 at 10:02:10 PM UTC-5, Don Y wrote:
I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement"! But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. I've used this stuff for closed cell rubber pipe insulation. It works for all kinds of rubber stuff like rubber sheet insulation. Johnstone Supply and other HVAC supply houses sell it. ^_^ http://www.insulationfabricators.com...-adhesive.html https://www.johnstonesupply.com/stor...ep?pID=G80-236 [8~{} Uncle Glue Monster |
#16
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On Sun, 11 Oct 2015 20:02:14 -0700, Don Y
wrote: I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement"! But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. See: http://www.thistothat.com/ (glue advice) |
#17
Posted to alt.home.repair,alt.usenet.kooks,alt.war.vietnam
|
|||
|
|||
Don Yubberlipz writes about "rubber sheets"
On 10/11/2015 8:02 PM, Don Y wrote:
I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. {lip snip ;-) } You can buy plastic sheets (don't know about rubber o_O) over the internet, which is better than buying them at a retail outfit. Especially when the lady at the register gets on the PA and sez: "Can anyone in bedding check the rubber sheets, king size, please!" LOL |
#18
Posted to alt.home.repair
|
|||
|
|||
bonding rubber sheets
On Sun, 11 Oct 2015 20:02:14 -0700, Don Y
wrote: I have two sheets of "rubber" -- ea approx 6x12" -- that I would like to bond together (face to face) AS IF they were a single sheet. I.e., 6x12" but thicker. "Rubber cement"! But, last time I used this was in grade school and I don't recall using it for *rubber*! Nor do I recall it as being a particularly strong bond! OTOH, I (belatedly!) understand that such an adhesive needs to be flexible (at least in some applications -- mine) and not brittle! I'm concerned primarily with shear loads, vibration, temperature extremes (-30F -- +130F), moisture, etc. Does "rubber cement" have these characteristics? Was my childhood exposure to it just driven by some *other* "advantage" that it had, back then (cheap, safe, etc.) -- considering the uses a kid would have for it wouldn't tend to need "strength", durability, etc. I've never used Rubber Cement. I just slip the rubber on my dick and get down to business! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bonding PVC to rubber? | Home Repair | |||
Shaping rubber and rubber balls. | UK diy | |||
Was: Shaping rubber and rubber balls: Update | UK diy | |||
Rubber idler wheel rubber restoration | Electronics Repair | |||
Cross-bonding/earth bonding gas meter | UK diy |