Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
I am servicing/cleaning my riding mower and am seeing rust on the
deck..........what can i apply to stop or slow down the rust? |
#2
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat"
wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm |
#3
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Tuesday, September 1, 2015 at 1:36:44 PM UTC-4, Oren wrote:
On Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat" wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? I know it is a PITA but it might help to clean off the caked on grass clippings after use, especially if they are wet. That caked on grass holds the moisture and is perfect for creating rust. Don't use any tool that will scrape the coating or paint off the deck. Of course make sure the blade has stopped completly before mucking around under there. Mark |
#4
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Tue, 1 Sep 2015 12:22:04 -0700 (PDT), wrote:
Of course make sure the blade has stopped completly before mucking around under there. ....I think you mean to also pull the spark plug wire off the plug |
#5
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On 9/1/15 3:26 PM, Oren wrote:
On Tue, 1 Sep 2015 12:22:04 -0700 (PDT), wrote: Of course make sure the blade has stopped completly before mucking around under there. ...I think you mean to also pull the spark plug wire off the plug I like to clean a riding-mower deck with the blades turning. I've used a couple with garden-hose adapters for the purpose. It's quicker than removing the deck. I don't recall a riding-mower manual that said to pull the spark-plug wire before removing the deck. |
#6
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 2 Sep 2015 00:50:12 -0400, J Burns wrote:
On 9/1/15 3:26 PM, Oren wrote: On Tue, 1 Sep 2015 12:22:04 -0700 (PDT), wrote: Of course make sure the blade has stopped completly before mucking around under there. ...I think you mean to also pull the spark plug wire off the plug I like to clean a riding-mower deck with the blades turning. I've used a couple with garden-hose adapters for the purpose. It's quicker than removing the deck. I don't recall a riding-mower manual that said to pull the spark-plug wire before removing the deck. Why would you, when the unpowered clutch disconnects the blade from the engine? |
#7
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On 9/1/15 1:36 PM, Oren wrote:
On Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat" wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm What could he apply over those products to stand up to the abrasion under the deck? |
#8
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 2 Sep 2015 00:53:03 -0400, J Burns wrote:
On 9/1/15 1:36 PM, Oren wrote: On Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat" wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm What could he apply over those products to stand up to the abrasion under the deck? Two coats of paint. The product serves as a primer. It seals moisture and oxygen (barrier) out to help prevent further rusting. Once the product is applied (I use two coats of the neutralizer), it should not be sanded or the barrier broken -- which defeats the purpose. |
#9
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 2 Sep 2015 00:53:03 -0400, J Burns wrote:
On 9/1/15 1:36 PM, Oren wrote: On Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat" wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm What could he apply over those products to stand up to the abrasion under the deck? Bed liner? |
#10
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
Per Oren:
Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm Does anybody have experience with just applying a rust converter and leaving it at that? i.e. Cosmetics not an issue, so no paint afterwards... -- Pete Cresswell |
#11
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 02 Sep 2015 13:32:15 -0400, "(PeteCresswell)"
wrote: Per Oren: Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm Does anybody have experience with just applying a rust converter and leaving it at that? i.e. Cosmetics not an issue, so no paint afterwards... Yep. POR-15 is tough. |
#12
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On 9/2/15 1:40 PM, Vic Smith wrote:
On Wed, 02 Sep 2015 13:32:15 -0400, "(PeteCresswell)" wrote: Per Oren: Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm Does anybody have experience with just applying a rust converter and leaving it at that? i.e. Cosmetics not an issue, so no paint afterwards... Yep. POR-15 is tough. I second that! I bought some in the 90's. I think it was two 4-oz bottles. I believe the company that produced it was small. One item I painted was a rusty iron rail. Years later, when I needed to repaint, I couldn't find the bottles, and the website seemed to be out of business. I see they have a website now, and Amazon sells it. Other stuff I've used is okay bare if not subjected to things like abrasion and prolonged moisture. For stuff that would be exposed to weather, I've preferred oil-based primer and a top coat. The last time I tried it, I use Rustoleum spray primer and Rustoleum spray top coat. It had plenty of time to dry, but in rainy weather, it would bubble. At Amazon, I see customer satisfaction for the Loctite brush-on stuff is high, but it's low for the spray stuff. I've always wanted to paint the underside of a mower deck, both to stop rust and the keep pulp from sticking. Here's advice from a mental-health therapist. http://homeguides.sfgate.com/durable-paint-lawn-tractor-deck-100761.html What she considers best is unclear to me. She says epoxy primer should have an oil topcoat for protection from the sun. I'd love to see how an epoxy topcoat would perform under a mower deck. She refers to a Paint Quality Institute article. I can't find anything about it at their site. |
#13
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 2 Sep 2015 15:18:09 -0400, J Burns wrote:
At Amazon, I see customer satisfaction for the Loctite brush-on stuff is high, but it's low for the spray stuff. As I mentioned before two coats seals the metal (best) . Brush on is really better -- folks falsely use too little of the Loctite product. Extend was bought buy Loctite. My first experience using "Extend" was circa ~1986. Satisfaction should include how the product is applied. Some reviews never mention a user's talent |
#14
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 2 Sep 2015 15:18:09 -0400, J Burns wrote:
I've always wanted to paint the underside of a mower deck, both to stop rust and the keep pulp from sticking. Here's advice from a mental-health therapist. http://homeguides.sfgate.com/durable-paint-lawn-tractor-deck-100761.html What she considers best is unclear to me. I'm sorry. Who consults a "mental-health therapist." for fixing a mower deck? Did I miss something important? |
#15
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 02 Sep 2015 13:32:15 -0400, "(PeteCresswell)"
wrote: Per Oren: Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm Does anybody have experience with just applying a rust converter and leaving it at that? i.e. Cosmetics not an issue, so no paint afterwards... My guess is that as long as the coating barrier (moisture & oxygen) is not broken or abraded and remains intact -- paint would not be necessary. Just a guess. What is your project? |
#16
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
Per Oren:
My guess is that as long as the coating barrier (moisture & oxygen) is not broken or abraded and remains intact -- paint would not be necessary. Just a guess. What is your project? Lawnmower attachment and a snow blower attachment... BCS... they didn't even prime either one before painting. -- Pete Cresswell |
#17
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 02 Sep 2015 17:17:06 -0400, "(PeteCresswell)"
wrote: Per Oren: My guess is that as long as the coating barrier (moisture & oxygen) is not broken or abraded and remains intact -- paint would not be necessary. Just a guess. What is your project? Lawnmower attachment and a snow blower attachment... BCS... they didn't even prime either one before painting. Likely cheap powder coat job. Looks good. Fis\rst scratch and you can peel the whole thing like an orange. |
#18
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 02 Sep 2015 10:40:13 -0700, Oren wrote:
On Wed, 02 Sep 2015 13:32:15 -0400, "(PeteCresswell)" wrote: Per Oren: Found in the local auto parts store. Brush on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend/overview/Loctite-Extend-Rust-Neutralizer.htm Spray on: http://www.loctiteproducts.com/p/7/24/s_trmt_extend_spray/overview/Loctite-Extend-Rust-Neutralizer-Spray.htm Does anybody have experience with just applying a rust converter and leaving it at that? i.e. Cosmetics not an issue, so no paint afterwards... My guess is that as long as the coating barrier (moisture & oxygen) is not broken or abraded and remains intact -- paint would not be necessary. Just a guess. What is your project? Paint protects the coating barrier - which is rather fragile. Pour 15 is tough stuff, but it still requires adequate preparation if you want it to hold. I use it on the wheel well lips on my truck to keep the rust-critters from taking a nibble. |
#19
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
In alt.home.repair, on Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat"
wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? On top of the deck or underneath the deck? -- Stumpy Strumpet the bimbus for dogcatcher |
#20
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
On Wed, 02 Sep 2015 08:11:05 -0400, micky
wrote: In alt.home.repair, on Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat" wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? On top of the deck or underneath the deck? I took "on the deck" to be on top, verses under the deck |
#21
Posted to alt.home.repair
|
|||
|
|||
mower deck rust
In alt.home.repair, on Wed, 02 Sep 2015 10:01:24 -0700, Oren
wrote: On Wed, 02 Sep 2015 08:11:05 -0400, micky wrote: In alt.home.repair, on Tue, 1 Sep 2015 17:07:59 GMT, "buckwheat" wrote: I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? On top of the deck or underneath the deck? I took "on the deck" to be on top, verses under the deck Me too, but some of the answers seemed to assume the opposite, so I wanted the OP to say which. -- Stumpy Strumpet the bimbus for dogcatcher |
#22
Posted to alt.home.repair,alt.support.depression,uk.rec.driving
|
|||
|
|||
mower deck rust
"buckwheat" wrote in message ...
I am servicing/cleaning my riding mower and am seeing rust on the deck..........what can i apply to stop or slow down the rust? Try some Rust B Gone |
#23
Posted to alt.home.repair,alt.support.depression,uk.rec.driving
|
|||
|
|||
mower deck rust
stop or slow down
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mower deck links | Metalworking | |||
Torro Mower Deck | Home Repair | |||
welding a mower deck | Home Repair | |||
Mower Deck Spindles | Home Repair | |||
mtd mower deck | Home Repair |