I have a few doors where the rubber that goes under the door is
deteriorated. Here is picture of what it looks liek from the top. I
pulled one out and there are slots that look like they had inserts to
hold the rubber in.
http://www.walmart.com/ip/19869470?w...591849&veh=sem
It also looks like I will have to take up the piece to get a new
rubber in.

Anyone install these. Do I have that about right? I haven't been
able to find the exact replacement piece.

I am afraid I will have to buy the "track" as well.

On Sat, 25 Oct 2014 18:41:13 -0400, Seymore4Head
wrote:

I have a few doors where the rubber that goes under the door is
deteriorated. Here is picture of what it looks liek from the top. I
pulled one out and there are slots that look like they had inserts to
hold the rubber in.
http://www.walmart.com/ip/19869470?w...591849&veh=sem
It also looks like I will have to take up the piece to get a new
rubber in.

Anyone install these. Do I have that about right? I haven't been
able to find the exact replacement piece.

I am afraid I will have to buy the "track" as well.

Slide on the new piece of strip via the kerf cut - left to right/ OR
what you have to do. so it fits. Trim with a razor blade to shorten
it.

Dan Epsen is an expert. Maybe he will chime in. Ask him.