Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Cutting 2" Concrete?
Our new house has a "pond", with koi fish, which is actually a concrete lined oval "tub" about 3' deep. I would like to eventually enlarge it and landscape to make it look more natural. Previous owner did the concrete work and lined that with epoxy grout. Ideally, I would like to cut a "U' in the narrower end to make the water flow continuous to add-on. Is their a tool, DIY or contractor, that will cut concrete without destroying the pool? If the only option is to cut straight "V", it might be disguised with stone or plants. Anyone with experience cutting concrete? |
#2
Posted to alt.home.repair
|
|||
|
|||
Cutting 2" Concrete?
On Thu, 03 Jan 2013 11:04:24 -0500, Norminn
wrote: Our new house has a "pond", with koi fish, which is actually a concrete lined oval "tub" about 3' deep. I would like to eventually enlarge it and landscape to make it look more natural. Previous owner did the concrete work and lined that with epoxy grout. Ideally, I would like to cut a "U' in the narrower end to make the water flow continuous to add-on. Is their a tool, DIY or contractor, that will cut concrete without destroying the pool? If the only option is to cut straight "V", it might be disguised with stone or plants. Anyone with experience cutting concrete? *IF* he didn't use any iron, the diamond impregnated blade in an old skilsaw will make quick work of it. IME- the first re-rod you hit makes them a nice metal disk with a smooth edge. [good for cutting vinyl siding-- but not much else.] I think if I was to do that in my climate, I'd use wire-lathe & I've never tried to cut that with one of those blades. If it *is* wire-lathed, I think a hammer might be your best bet. Just go at it, not worrying about neatness-- let the mason cover up all the sins. [even if you are the mason]. Jim |
#3
Posted to alt.home.repair
|
|||
|
|||
Cutting 2" Concrete?
On Thursday 03 January 2013 16:04 Norminn wrote in alt.home.repair:
Our new house has a "pond", with koi fish, which is actually a concrete lined oval "tub" about 3' deep. I would like to eventually enlarge it and landscape to make it look more natural. Previous owner did the concrete work and lined that with epoxy grout. Ideally, I would like to cut a "U' in the narrower end to make the water flow continuous to add-on. Is their a tool, DIY or contractor, that will cut concrete without destroying the pool? If the only option is to cut straight "V", it might be disguised with stone or plants. Anyone with experience cutting concrete? Suitably sized angle grinder with a diamond blade - if you can do it with a series of straight cuts. With care it will give you nice clean edges. How thick is the concrete? If you are running new concrete onto it, you will probably want to grout (ie with a vinylester resin or similar) in some rebar studs so there is a postive lock between old and new concrete around the joint. -- Tim Watts Personal Blog: http://www.dionic.net/tim/ "A fanatic is one who can't change his mind and won't change the subject." |
#4
Posted to alt.home.repair
|
|||
|
|||
Cutting 2" Concrete?
Our new house has a "pond", with koi fish, which is actually a concrete lined oval "tub" about 3' deep. I would like to eventually enlarge it and landscape to make it look more natural. Previous owner did the concrete work and lined that with epoxy grout. Ideally, I would like to cut a "U' in the narrower end to make the water flow continuous to add-on. Is their a tool, DIY or contractor, that will cut concrete without destroying the pool? If the only option is to cut straight "V", it might be disguised with stone or plants. Anyone with experience cutting concrete? I have found it advantageous to call local contractors for free estimates, and ideas. Sometimes, they can do the job for a very reasonable price, do it right, and provide all the spendy equipment. Or, the job is so small that they will tell you how to do it. Or at least give you some hints if you know how to ask the right questions. Sounds like a quickie saw and a couple of hours ought to do it. A quickie saw is a chainsaw with a round blade on it, used by block guys to cut block and rebar. For cash, I bet you could get it done very reasonably by someone wanting to fill in a couple of hours here or there. Steve |
#5
Posted to alt.home.repair
|
|||
|
|||
Cutting 2" Concrete?
On Thu, 03 Jan 2013 11:04:24 -0500, Norminn
wrote: Our new house has a "pond", with koi fish, which is actually a concrete lined oval "tub" about 3' deep. I would like to eventually enlarge it and landscape to make it look more natural. Previous owner did the concrete work and lined that with epoxy grout. Ideally, I would like to cut a "U' in the narrower end to make the water flow continuous to add-on. Is their a tool, DIY or contractor, that will cut concrete without destroying the pool? If the only option is to cut straight "V", it might be disguised with stone or plants. Anyone with experience cutting concrete? You don't mention how deep you want this "U" shape cut. It is 3', 2', 18 inches or 4 inches? Even a photo link would help. Some completing reason it has to be shaped as a "U" or "V"? |
#6
Posted to alt.home.repair
|
|||
|
|||
Cutting 2" Concrete?
Norminn wrote:
Our new house has a "pond", with koi fish, which is actually a concrete lined oval "tub" about 3' deep. I would like to eventually enlarge it and landscape to make it look more natural. Previous owner did the concrete work and lined that with epoxy grout. Ideally, I would like to cut a "U' in the narrower end to make the water flow continuous to add-on. Is their a tool, DIY or contractor, that will cut concrete without destroying the pool? If the only option is to cut straight "V", it might be disguised with stone or plants. Anyone with experience cutting concrete? Let me see if I have this right... You have a tub - plastic I presume - that has been lined with concrete; you want to remove some of the concrete without damaging the tub, right? The first thought is a diamond blade in whatever as others suggested. However, you would have to control the depth of cut carefully so as to not damage the tub. Safest way would be to cut almost all the way through the concrete and carefully break out the remainder. The problem with that is that you don't know how thick the concrete is and it may well vary in thickness. I think if I were doing it I would use a chisel (SDS) drill since the area isn't all that big. Harbor Freight used to have one for about $100, I don't see it now. Others are from $200, I'm sure they can be rented. They work like a rotary drill, which can hammer or rotate or both except there is a third setting for hammer only. They really do chop up concrete in a hurry. You could also do it by hand using a mason's chisel and a hammer. I recently did some that way, used a chisel about 1 1/2" wide plus another about 5/8 to get an area started. I doubt the concrete is very adhered to the tub, assuming it is plastic, so all you really need to do is chisel through the outline of what you want gone, then start prying (carefully). -- dadiOH ____________________________ Winters getting colder? Tired of the rat race? Taxes out of hand? Maybe just ready for a change? Check it out... http://www.floridaloghouse.net |
#7
Posted to alt.home.repair
|
|||
|
|||
Cutting 2" Concrete? ....THANKS
Thanks to all who offered info....I won't be busting concrete myself,
but it's good to know it won't take a major demo team ) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cutting Concrete | Home Repair | |||
Cutting Concrete | Home Repair | |||
Cutting concrete | Home Repair | |||
Cutting Concrete? | Home Repair | |||
Cutting Concrete? | Home Repair |