Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
Time again to reverse the direction of the ceiling fan in the bedroom.
Twice a year, just like Daylight Savings Time. Problem is, I can't reach the switch without fetching a ladder or step-stool. There's got to be a better way! Searching through the bin of things longer than they are wide, I found a 1/8 x 1/2" stick of aluminum, about 4 feet long. Heating up the end with a propane torch, I was able to bend one inch over to 90° to the main part. Now I can just hook, or push, the switch! No more hauling in a hazardous ladder and so forth. I store the tool in the bedroom closet; it doesn't take up much room. |
#2
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
"HeyBub" wrote:
Time again to reverse the direction of the ceiling fan in the bedroom. Twice a year, just like Daylight Savings Time. Problem is, I can't reach the switch without fetching a ladder or step-stool. There's got to be a better way! Searching through the bin of things longer than they are wide, I found a 1/8 x 1/2" stick of aluminum, about 4 feet long. Heating up the end with a propane torch, I was able to bend one inch over to 90Β° to the main part. Now I can just hook, or push, the switch! No more hauling in a hazardous ladder and so forth. I store the tool in the bedroom closet; it doesn't take up much room. Sometime between now and spring, you'll end up needing a 1/8" x 1/2 stick of aluminum, about 4 feet long, for a project. You'll remember the tool you made and go get it from the bedroom closet. You'll find that you need it to be straight, so you'll cut the 1" bend off. You'll then find that the stick is 1 too short for your current project. "Oh well", you'll say, "I'll just put the bend back in." You will then find that it is 1 to short to reach the fan switch and you'll go get the step ladder you should have gotten yesterday. |
#3
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
On Mon, 3 Dec 2012 23:15:09 +0000 (UTC), DerbyDad03
wrote: "HeyBub" wrote: Time again to reverse the direction of the ceiling fan in the bedroom. Twice a year, just like Daylight Savings Time. Problem is, I can't reach the switch without fetching a ladder or step-stool. There's got to be a better way! Searching through the bin of things longer than they are wide, I found a 1/8 x 1/2" stick of aluminum, about 4 feet long. Heating up the end with a propane torch, I was able to bend one inch over to 90° to the main part. Now I can just hook, or push, the switch! No more hauling in a hazardous ladder and so forth. I store the tool in the bedroom closet; it doesn't take up much room. Sometime between now and spring, you'll end up needing a 1/8" x 1/2 stick of aluminum, about 4 feet long, for a project. You'll remember the tool you made and go get it from the bedroom closet. You'll find that you need it to be straight, so you'll cut the 1" bend off. You'll then find that the stick is 1 too short for your current project. "Oh well", you'll say, "I'll just put the bend back in." You will then find that it is 1 to short to reach the fan switch and you'll go get the step ladder you should have gotten yesterday. You must be daft! What are the odds of that ever happening? :-0 |
#4
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
"HeyBub" wrote in message
... Time again to reverse the direction of the ceiling fan in the bedroom. Twice a year, just like Daylight Savings Time. Problem is, I can't reach the switch without fetching a ladder or step-stool. There's got to be a better way! Searching through the bin of things longer than they are wide, I found a 1/8 x 1/2" stick of aluminum, about 4 feet long. Heating up the end with a propane torch, I was able to bend one inch over to 90° to the main part. Now I can just hook, or push, the switch! No more hauling in a hazardous ladder and so forth. I store the tool in the bedroom closet; it doesn't take up much room. 'Ceptin you didn't need to heat the alum to bend it. -- EA |
#5
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
On Mon, 3 Dec 2012 16:00:49 -0600, "HeyBub"
wrote: Time again to reverse the direction of the ceiling fan in the bedroom. Twice a year, just like Daylight Savings Time. Problem is, I can't reach the switch without fetching a ladder or step-stool. There's got to be a better way! Searching through the bin of things longer than they are wide, I found a 1/8 x 1/2" stick of aluminum, about 4 feet long. Heating up the end with a propane torch, I was able to bend one inch over to 90° to the main part. Now I can just hook, or push, the switch! No more hauling in a hazardous ladder and so forth. I store the tool in the bedroom closet; it doesn't take up much room. You must have 8' ceilings. Mine are 10' and I can reach the switch by standing on the bed. |
#6
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
Oren wrote in
: You must have 8' ceilings. Mine are 10' and I can reach the switch by standing on the bed. That's dangerous. It's much safer to stand on a rolling swivel chair. -- Tegger |
#7
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
Happened to the woman from Meskogie, back in
1961. It was really a tear jerker, too. She was so sad. I know, she was my barber's sister's cousin. It must be true. Christopher A. Young Learn more about Jesus www.lds.org .. "Gordon Shumway" wrote in message news Sometime between now and spring, you'll end up needing a 1/8" x 1/2" stick of aluminum, about 4 feet long, for a project. You'll remember the tool you made and go get it from the bedroom closet. You'll find that you need it to be straight, so you'll cut the 1" bend off. You'll then find that the stick is 1" too short for your current project. "Oh well", you'll say, "I'll just put the bend back in." You will then find that it is 1" to short to reach the fan switch and you'll go get the step ladder you should have gotten yesterday. You must be daft! What are the odds of that ever happening? :-0 |
#8
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
With his arthritis?
Christopher A. Young Learn more about Jesus www.lds.org .. "Existential Angst" wrote in message ... 'Ceptin you didn't need to heat the alum to bend it. -- EA |
#9
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
On Tue, 4 Dec 2012 00:04:42 +0000 (UTC), Tegger
wrote: Oren wrote in : You must have 8' ceilings. Mine are 10' and I can reach the switch by standing on the bed. That's dangerous. It's much safer to stand on a rolling swivel chair. Well, I finally stopped changing the direction of the fan rotation. |
#10
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
On Dec 3, 6:27*pm, Oren wrote:
On Tue, 4 Dec 2012 00:04:42 +0000 (UTC), Tegger wrote: Oren wrote in : You must have 8' ceilings. *Mine are 10' and I can reach the switch by standing on the bed. That's dangerous. It's much safer to stand on a rolling swivel chair. Well, I finally stopped changing the direction of the fan rotation. how and why??? |
#11
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
On Mon, 3 Dec 2012 17:04:48 -0800 (PST), "hr(bob) "
wrote: On Dec 3, 6:27*pm, Oren wrote: On Tue, 4 Dec 2012 00:04:42 +0000 (UTC), Tegger wrote: Oren wrote in : You must have 8' ceilings. *Mine are 10' and I can reach the switch by standing on the bed. That's dangerous. It's much safer to stand on a rolling swivel chair. Well, I finally stopped changing the direction of the fan rotation. how and why??? Just preference. Nothing special or an injury. |
#12
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
In article ,
"HeyBub" wrote: Time again to reverse the direction of the ceiling fan in the bedroom. Twice a year, just like Daylight Savings Time. Problem is, I can't reach the switch without fetching a ladder or step-stool. There's got to be a better way! Searching through the bin of things longer than they are wide, I found a 1/8 x 1/2" stick of aluminum, about 4 feet long. Heating up the end with a propane torch, I was able to bend one inch over to 90? to the main part. Now I can just hook, or push, the switch! No more hauling in a hazardous ladder and so forth. I store the tool in the bedroom closet; it doesn't take up much room. You need some Wheaties, son, if you can't bend 1/8" aluminum without a torch. |
#13
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
"HeyBub" wrote in message
... Searching through the bin of things longer than they are wide, I found a 1/8 x 1/2" stick of aluminum, about 4 feet long. Heating up the end with a propane torch, I was able to bend one inch over to 90° to the main part. Task here was to scrape remnants of paper wasp nest off the siding up under the eaves. Done by old painting supplies: Telescopic extending pole with screw thread at end that fits discarded paint roller (roller removed, leaving a short hook.) This tool reaches about 9 feet, also useful for steering the Kreepy Krawler that cleans the pool. -- Don Phillipson Carlsbad Springs (Ottawa, Canada) |
#14
Posted to alt.home.repair
|
|||
|
|||
A real craftsman makes his own tools!
On Mon, 3 Dec 2012 23:15:09 +0000 (UTC), DerbyDad03
wrote: Time again to reverse the direction of the ceiling fan in the bedroom. Twice a year, just like Daylight Savings Time. And I always thought that Sears made craftsman tools! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Who makes Craftsman Evolv? | Home Repair | |||
Who Actually Makes Craftsman Mitre Saws? | Woodworking | |||
Who Actually Makes Craftsman Mitre Saws? | Woodworking | |||
Who Actually Makes Craftsman Mitre Saws? | Woodworking | |||
Makes Your Place Into a Real Garden of Eden | Home Repair |