|
Table saw finger remover
They say 4000 idiots a year saw their fingers off on table saws. That's
10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. |
Table saw finger remover
"Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Thanks for posting this, but the Saw Stop and potential legislation issue has been around for a few years. I'm glad you have all your fingers, but many a sensible seasoned pro has lost one on occasion. I has happened to the best so don't jinx yourself by gloating. |
Table saw finger remover
"Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Hey, Mr. Knowitall. You forgot the keyword. Yet. But I guess it could never happen to a guy as smart as you. Right? Steve |
Table saw finger remover
In article ,
"Ed Pawlowski" wrote: "Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Thanks for posting this, but the Saw Stop and potential legislation issue has been around for a few years. I'm glad you have all your fingers, but many a sensible seasoned pro has lost one on occasion. I has happened to the best so don't jinx yourself by gloating. I haven't lost one, but stuck the tip of my index finger into the blade 30 yrs. ago. Tried to rip it down the middle. Took out about 1/4" long slice of meat and bone. Doc at the emergency room pinched the rest of it together and put in a few stitches. Kinda pointy and a combination of numb and sensitive, with a misshapen nail. |
Table saw finger remover
On Sun, 19 Jun 2011 00:10:29 -0400, Ed Pawlowski wrote:
"Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Thanks for posting this, but the Saw Stop and potential legislation issue has been around for a few years. I'm glad you have all your fingers, but many a sensible seasoned pro has lost one on occasion. I has happened to the best so don't jinx yourself by gloating. So I wonder what the ratio is; how many table saws are out there. Millions to hundreds of millions? |
Table saw finger remover
On Sat, 18 Jun 2011 22:04:24 -0700, Steve B wrote:
"Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Hey, Mr. Knowitall. You forgot the keyword. Yet. But I guess it could never happen to a guy as smart as you. Right? Steve I don't see how "keep your fingers away from the blade" would not click to them. It means at all costs! Not if you feel like it some days. |
Table saw finger remover
On 19 Jun 2011 10:37:44 GMT, Dbdblocker wrote:
On Sat, 18 Jun 2011 22:04:24 -0700, Steve B wrote: "Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Hey, Mr. Knowitall. You forgot the keyword. Yet. But I guess it could never happen to a guy as smart as you. Right? Steve I don't see how "keep your fingers away from the blade" would not click to them. It means at all costs! Not if you feel like it some days. I must say your grammar and punctuation is quite good for someone so young. By the time you're 12 or so, you might have made a mistake. If you're lucky it won't involve machinery. If you're really lucky, it will involve machinery but only damage some safety gear- or only scratch deep enough to serve as a warning. If you aren't that lucky- come on back and tell us how '**** happens'. Jim [got all my digits, and only minor scars-- but I'm human] |
Table saw finger remover
"Dbdblocker" wrote I don't see how "keep your fingers away from the blade" would not click to them. It means at all costs! Not if you feel like it some days. In spite of using care a piece of wood can cause kickback and it draws your hand to the blade in milliseconds. Sometimes it is being tired, rushed, or distracted. I wonder how many of those accidents are "just one more cut and I'm done for the day". |
Table saw finger remover
On Sun, 19 Jun 2011 07:42:25 -0400, Jim Elbrecht wrote:
On 19 Jun 2011 10:37:44 GMT, Dbdblocker wrote: On Sat, 18 Jun 2011 22:04:24 -0700, Steve B wrote: "Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Hey, Mr. Knowitall. You forgot the keyword. Yet. But I guess it could never happen to a guy as smart as you. Right? Steve I don't see how "keep your fingers away from the blade" would not click to them. It means at all costs! Not if you feel like it some days. I must say your grammar and punctuation is quite good for someone so young. By the time you're 12 or so, you might have made a mistake. If you're lucky it won't involve machinery. If you're really lucky, it will involve machinery but only damage some safety gear- or only scratch deep enough to serve as a warning. If you aren't that lucky- come on back and tell us how '**** happens'. Jim [got all my digits, and only minor scars-- but I'm human] It has nothing to do with luck and superstition. Relying on religion won't save your fingers. I don't care if you have 10 PhD's, if you stick your finger in a saw blade you are an idiot. |
Table saw finger remover
On 6/19/2011 7:53 AM, Ed Pawlowski wrote:
"Dbdblocker" wrote I don't see how "keep your fingers away from the blade" would not click to them. It means at all costs! Not if you feel like it some days. In spite of using care a piece of wood can cause kickback and it draws your hand to the blade in milliseconds. Sometimes it is being tired, rushed, or distracted. I wonder how many of those accidents are "just one more cut and I'm done for the day". I dare say a good part of them, with most of the rest being people who watch a DIY show and run out and buy a saw, but never had an experienced user watching over them and giving them a dope slap when they do something dangerous. My father, and the master carpenters that worked for him back in the day, were kind enough to teach me how to use a saw, and they didn't mince words when I did it wrong. Gotta give Norm Abrams credit- he always does the safety spiel, uses push sticks and feather boards, etc. (Side question- I haven't seen any fresh new Yankee Workshops lately, and Norm barely appears on the other show any more- has he semi-retired or something? I call him a machinist who happens to work in wood. Yes, some of his projects are absurd for a DIY to attempt, and his tool collection is worth more than my house, but he sure is fun to watch.) I hope to have space and time and money to have a table saw again one day, but it won't have a self-destruct mechanism like that. But then again, I won't be doing production work, and I'm already to the point in life where if I'm tired or hungry or ****ed off, I STOP doing complicated stuff before I screw something up or hurt myself. There is always another day to finish it. After enough expensive/painful 'aw ****' moments over the years, that lesson finally sank in. I bet more people hurt themselves with circular saws, since there are probably 1000x as many of those in use. Haven't seen any push to idiot-proof them, beyond the orange buttons. Chain saws are another hazardous tool that gets little attention- after the recent storm here, there were at least a dozen folks (according to the local paper) that hurt themselves seriously, cutting up downed trees. Right after the storm, seems like all the guys with a chainsaw in the garage were running out to get their streets open on their block. The ones with nice shiny saws seemed a little unsure of themselves, and you could see the old gray-hairs with the seriously used saws were having to keep an eye on them. -- aem sends... |
Table saw finger remover
On 6/18/2011 10:52 PM, Dbdblocker wrote:
They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. I have a friend whose dad took up woodworking when he retired. Nice, smart guy who worked at a desk for many years but with NO experience with tools....he promptly removed three fingers. And most people tempt fate in some fashion now and then. An experienced supervisor in punch press dept. where I worked nipped off the tip of a finger showing someone how to do something....just a quarter inch off, I suppose. |
Table saw finger remover
On 6/19/2011 7:53 AM, Ed Pawlowski wrote:
"Dbdblocker" wrote I don't see how "keep your fingers away from the blade" would not click to them. It means at all costs! Not if you feel like it some days. In spite of using care a piece of wood can cause kickback and it draws your hand to the blade in milliseconds. Sometimes it is being tired, rushed, or distracted. I wonder how many of those accidents are "just one more cut and I'm done for the day". "Distracted" is my normal state :o) Measure over again, but not using power tools. |
Table saw finger remover
"aemeijers" wrote in message
... On 6/19/2011 7:53 AM, Ed Pawlowski wrote: "Dbdblocker" wrote I don't see how "keep your fingers away from the blade" would not click to them. It means at all costs! Not if you feel like it some days. In spite of using care a piece of wood can cause kickback and it draws your hand to the blade in milliseconds. Sometimes it is being tired, rushed, or distracted. I wonder how many of those accidents are "just one more cut and I'm done for the day". I dare say a good part of them, with most of the rest being people who watch a DIY show and run out and buy a saw, but never had an experienced user watching over them and giving them a dope slap when they do something dangerous. My father, and the master carpenters that worked for him back in the day, were kind enough to teach me how to use a saw, and they didn't mince words when I did it wrong. Gotta give Norm Abrams credit- he always does the safety spiel, uses push sticks and feather boards, etc. (Side question- I haven't seen any fresh new Yankee Workshops lately, and Norm barely appears on the other show any more- has he semi-retired or something? I call him a machinist who happens to work in wood. Yes, some of his projects are absurd for a DIY to attempt, and his tool collection is worth more than my house, but he sure is fun to watch.) I hope to have space and time and money to have a table saw again one day, but it won't have a self-destruct mechanism like that. But then again, I won't be doing production work, and I'm already to the point in life where if I'm tired or hungry or ****ed off, I STOP doing complicated stuff before I screw something up or hurt myself. There is always another day to finish it. After enough expensive/painful 'aw ****' moments over the years, that lesson finally sank in. I bet more people hurt themselves with circular saws, since there are probably 1000x as many of those in use. I recall reviewing the types of injuries saws produce and there was a very impressive number of people who used circular saws over their heads on a ladder (sawing holes in ceilings, for instance) that lived to regret it and quite a few that didn't. Live, that is. Haven't seen any push to idiot-proof them, beyond the orange buttons. Chain saws are another hazardous tool that gets little attention- after the recent storm here, there were at least a dozen folks (according to the local paper) that hurt themselves seriously, cutting up downed trees. Right after the storm, seems like all the guys with a chainsaw in the garage were running out to get their streets open on their block. The ones with nice shiny saws seemed a little unsure of themselves, and you could see the old gray-hairs with the seriously used saws were having to keep an eye on them. The problem I've seen with naive chain saw users is they don't account for what happens when the last little bit of material is gone and gravity or the "springiness" of wood takes over. My favorite has to be the guys who cut this huge 20' section of a 2' diameter oak tree. They had it tied to four other trees quite thoroughly to prevent it from falling. When the final cut was made this huge section of tree started jumping around like the ghost of Paul Bunyan riding a pogo stick. The branches they had tied it to were quite springy and it took quite a while for the bouncing around to stop. -- Bobby G. |
Table saw finger remover
"Ed Pawlowski" wrote in message
... "Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Thanks for posting this, but the Saw Stop and potential legislation issue has been around for a few years. I'm glad you have all your fingers, but many a sensible seasoned pro has lost one on occasion. I has happened to the best so don't jinx yourself by gloating. You're right about the jinx. In the infantry talk like that gets you assigned to walking point - a lot - until you learn to keep from saying things that might "call the shots in" on your fellow soldiers. Or until you get shot or blown up. Either way puts an end to that jinx talk. -- Bobby G. |
Table saw finger remover
And the government control folks will say "but if just one
finger could be saved." -- Christopher A. Young Learn more about Jesus www.lds.org .. "Ed Pawlowski" wrote in message ... In spite of using care a piece of wood can cause kickback and it draws your hand to the blade in milliseconds. Sometimes it is being tired, rushed, or distracted. I wonder how many of those accidents are "just one more cut and I'm done for the day". |
Table saw finger remover
In article ,
"Ed Pawlowski" wrote: "Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Thanks for posting this, but the Saw Stop and potential legislation issue has been around for a few years. I'm glad you have all your fingers, but many a sensible seasoned pro has lost one on occasion. I has happened to the best so don't jinx yourself by gloating. I haven't lost one, but stuck the tip of my index finger into the blade 30 yrs. ago. Tried to rip it down the middle. Took out about 1/4" long slice of meat and bone. Doc at the emergency room pinched the rest of it together and put in a few stitches. Kinda pointy and a combination of numb and sensitive, with a misshapen nail. Stay away from all tools,you are dangerous to other people,move to Florida and play with the old ladies. |
Table saw finger remover
"Jim Elbrecht" wrote I must say your grammar and punctuation is quite good for someone so young. By the time you're 12 or so, you might have made a mistake. If you're lucky it won't involve machinery. If you're really lucky, it will involve machinery but only damage some safety gear- or only scratch deep enough to serve as a warning. If you aren't that lucky- come on back and tell us how '**** happens'. Jim [got all my digits, and only minor scars-- but I'm human] I am 62. I'm retired. In my life, I was a certified weldor, steel erection contractor, certified commercial diver, OSHA certified crane operator, OSHA certified rigger, OSHA certified lift truck (fork lift for the newbies) operator, and lots of other things. I have worked overseas. I currently have a large shop with lots of tools. I also have all my digits. So far. But I do know that something can happen at any moment to change that. And it mostly happens to those who think it can't happen to them. You have a good day. You may leave now. Steve |
Table saw finger remover
"Ed Pawlowski" wrote I wonder how many of those accidents are "just one more cut and I'm done for the day". Statistics from ski slopes show that the highest % of accidents happen in the last hour, many on "one last run." Steve |
Table saw finger remover
Dbdblocker wrote in
.com: They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Fate let you keep all 10 fingers to remind you of your IQ. |
Table saw finger remover
"Steve B" wrote in message ... "Jim Elbrecht" wrote I must say your grammar and punctuation is quite good for someone so young. By the time you're 12 or so, you might have made a mistake. If you're lucky it won't involve machinery. If you're really lucky, it will involve machinery but only damage some safety gear- or only scratch deep enough to serve as a warning. If you aren't that lucky- come on back and tell us how '**** happens'. Jim [got all my digits, and only minor scars-- but I'm human] I am 62. I'm retired. In my life, I was a certified weldor, steel erection contractor, certified commercial diver, OSHA certified crane operator, OSHA certified rigger, OSHA certified lift truck (fork lift for the newbies) operator, and lots of other things. I have worked overseas. I currently have a large shop with lots of tools. I also have all my digits. So far. But I do know that something can happen at any moment to change that. And it mostly happens to those who think it can't happen to them. You have a good day. You may leave now. Steve Let me clarify. I was responding to dingleblocker, not you, Jim. Steve |
Table saw finger remover
Dbdblocker wrote:
On Sun, 19 Jun 2011 00:10:29 -0400, Ed Pawlowski wrote: "Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Thanks for posting this, but the Saw Stop and potential legislation issue has been around for a few years. I'm glad you have all your fingers, but many a sensible seasoned pro has lost one on occasion. I has happened to the best so don't jinx yourself by gloating. So I wonder what the ratio is; how many table saws are out there. Millions to hundreds of millions? Think about it for a moment. There are about 300 million people in the US. So, does one in 3 have a table saw? |
Table saw finger remover
Red Green wrote:
Dbdblocker wrote in .com: They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Fate let you keep all 10 fingers to remind you of your IQ. Lots of years ago, in the high school shop class we had safety posters, one was a guys thumb or finger that had been pulled off, laying on a towel with the tendons still attached. Another said, "There are 12 companies that make glass eyes, ever wonder why?" |
Table saw finger remover
"Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. --------------------- I'm taking a cabinet making course at a college. My course is a learn as go type coarse but during the day it's for full time students. About 80 students a day I'm told. They have 7 table saws altogether and every single one of them has a saw stop. At every table saw they mount all the saw accessories, jigs, sleds tools, etc on 4 x 8 wall boards. What they also have mounted are the used pieces of a saw stop that was activated. They mount the broken blade, the saw stop unit and electrical components that saved the student from serious damage. The 8 foot panel saw has 4 such used saw stop units mounted. The remaining 6 saws only have 2 used saw stops on display, combined. |
Table saw finger remover
The Henchman wrote:
"Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. --------------------- I'm taking a cabinet making course at a college. My course is a learn as go type coarse but during the day it's for full time students. About 80 students a day I'm told. They have 7 table saws altogether and every single one of them has a saw stop. At every table saw they mount all the saw accessories, jigs, sleds tools, etc on 4 x 8 wall boards. What they also have mounted are the used pieces of a saw stop that was activated. They mount the broken blade, the saw stop unit and electrical components that saved the student from serious damage. The 8 foot panel saw has 4 such used saw stop units mounted. The remaining 6 saws only have 2 used saw stops on display, combined. How many of the activations were "false alarms"? |
Table saw finger remover
On 6/18/2011 10:52 PM, Dbdblocker wrote: The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. BY THE WAY .... the SAWSTOP does NO SUCH THING .... there is absolutely ZERO damage to the motor shaft, and only minimal (repairable) damage to the blade. |
Table saw finger remover
"Steve B" wrote:
-snip- Let me clarify. I was responding to dingleblocker, not you, Jim. I knew dat. I dd read it twice, though.g Jim |
Table saw finger remover
How many of the activations were "false alarms"? -------------- Good question. What I know is one was from wet wood that a student brought in without teacher authorization. Wet wood CAN trip a saw stop. We are instructed in that. Since this lab was set-up about 12 ears ago, four students have had finger damage I'm told. Therefore in total out of 6 saw stop activations, one is definitely false alarm and 4 are from actual human contact although I have no idea if it's serious enuf or not. The remaining one I do not know. I was also told that nails can activate these saw stops. |
Table saw finger remover
On Sun, 19 Jun 2011 13:07:21 -0400, The Henchman wrote:
"Dbdblocker" wrote in message .com... They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. --------------------- I'm taking a cabinet making course at a college. My course is a learn as go type coarse but during the day it's for full time students. About 80 students a day I'm told. They have 7 table saws altogether and every single one of them has a saw stop. At every table saw they mount all the saw accessories, jigs, sleds tools, etc on 4 x 8 wall boards. What they also have mounted are the used pieces of a saw stop that was activated. They mount the broken blade, the saw stop unit and electrical components that saved the student from serious damage. The 8 foot panel saw has 4 such used saw stop units mounted. The remaining 6 saws only have 2 used saw stops on display, combined. Good thing they aren't training electricians. |
Table saw finger remover
On Sun, 19 Jun 2011 14:35:11 +0000, Red Green wrote:
Dbdblocker wrote in .com: They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Fate let you keep all 10 fingers to remind you of your IQ. I guess that's all you need to keep your fingers. |
Table saw finger remover
On Jun 20, 9:50*am, Steve Barker wrote:
On 6/18/2011 9:52 PM, Dbdblocker wrote: They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! *What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Who is "THEY". *I doubt seriously if 4000 fingers have been chopped off in the history of table saws total. -- Steve Barker remove the "not" from my address to email I had a realtive who cut off 4 fingers years ago, and talked to someone last week whos boss lost 5 just days before. all tools can be dangerous |
Table saw finger remover
On Mon, 20 Jun 2011 07:08:34 -0700 (PDT), bob haller
wrote: On Jun 20, 9:50Â*am, Steve Barker wrote: On 6/18/2011 9:52 PM, Dbdblocker wrote: They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! Â*What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Who is "THEY". Â*I doubt seriously if 4000 fingers have been chopped off in the history of table saws total. -- Steve Barker remove the "not" from my address to email I had a realtive who cut off 4 fingers years ago, and talked to someone last week whos boss lost 5 just days before. all tools can be dangerous Fingers are the most "expendable" body parts.. My stepmother lost 2 fingers just by wrapping the slippery anchor line of a small boat around her hand. Anchor was snagged and a wave lifted the boat. Gotta watch them fingers. I'm REAL careful with power saws. Stupidest thing I've done so far is squeeze off a staple into my middle finger. New stapler and I was just stupid and not thinking. Both legs went all the way in so the thing was flush to the skin, but missed the bone. Think it was a 1/2". Hardly hurt, but damn, it's a shock seeing your finger perfectly stapled. I spotted a pair of needle nose pliers on the bench, got a grip on the middle of the staple, yelled loud, and jerked it straight out. It's best to yell loud when you do that I think. The whole thing was no more than about 10 seconds, and it hardly bled. Gives me the chills thinking of a power saw getting me. Gotta watch them fingers. --Vic |
Table saw finger remover
"Steve Barker" wrote in message
... On 6/18/2011 9:52 PM, Dbdblocker wrote: They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. Been using one for 50+ years and still have all my fingers. There must be some real dummies out there. By the way, the safety device destroys the blade and motor shaft if activated. Who is "THEY". I doubt seriously if 4000 fingers have been chopped off in the history of table saws total. Just like the dubious estimates of how many citizens are murdered by illegal aliens (something I've still not been able to find reasonable source data for) the estimates of amputations are made on pretty small samples that are scaled up to match the actual population figures: http://www.popularwoodworking.com/ar...in-perspective "The same effect occurs if the word "amputation" appears. In 2009 for example, 117 reported cases were projected to arrive at an estimate of 4211 finger amputations. A look at the actual notes reveals that four cases weren't table saws after all, and six were near amputations. That's only ten instances, but ten out of 117 is 8.5 percent. The projected numbers are weighted, so you can't simply multiply, but you can safely say that the total number is overstated." Overstated or not, a lot of people visit the ER daily for power tool injuries of all kinds. Saws tend to do the most damage and they do it much more quickly than drills and other types of equipment. Back when long hair was popular, a buddy of mine knocked himself out with a router when his hair curled around the bit and drew the router towards his head like a lightning bolt. I would guess enough fingers are lost every year to make a Cheyenne warrior very proud: http://www.informaworld.com/smpp/con...ent=a917943233 ("the article focuses on a particular trophy, a nineteenth century Cheyenne finger necklace. Its history illustrates that trophy-taking was part of a broader circulation of practices of war among native warriors and the American military in the West.) For those who aren't squeamish: http://historygallery.com/prints/ind...rsnecklace.htm I doubt they were removed by table saw. (-: For the victim's sake, I hope they were removed post-mortem. You may ask what's that round thing on the end? - and then wish you hadn't! -- Bobby G. |
Table saw finger remover
On Jun 20, 10:17*am, Vic Smith
wrote: On Mon, 20 Jun 2011 07:08:34 -0700 (PDT), bob haller wrote: On Jun 20, 9:50*am, Steve Barker wrote: On 6/18/2011 9:52 PM, Dbdblocker wrote: They say 4000 idiots a year saw their fingers off on table saws. That's 10 per day! *What is it about 'keep your fingers aways from the spinning blade' that they do not understand? The federal gubberment is going to work on a bill to require that new 'meat sensor' safety device on all table saws. It will add $300 to $500 to the cost. Gee, mine cost $150. |
Table saw finger remover
|
Table saw finger remover
"Steve Barker" wrote Who is "THEY". I doubt seriously if 4000 fingers have been chopped off in the history of table saws total. Check out the chart on page 6 here http://www.finewoodworking.com/item/...lesaw-injuries According to a recent study published in the Journal of Trauma, a professional journal for ER staff, roughly 31,400 people are treated in emergency rooms every year for tablesaw injuries. This is based on ER reports compiled from 1990 to 2007 and amazingly, that figure doesnt even include folks who are injured on the job. Those statistics are kept separate and arent included in the study. As you might imagine, roughly 93 percent of those injuries were to the users finger, thumb or another part of their hand. 66 percent of those injured had lacerations while 10 percent had amputations. Other types of injuries include soft-tissue injuries to the head, face and neck, presumably from flying lumber or debris caused by kickback. http://www.nclnet.org/health/99-safe...y-improvements Did you know that each year, tens of thousands of people are brutally injured by table saws €“ including 4,000 amputations €“ at a cost of more than $2 billion a year to treat victims? The National Consumers League is calling on the Consumer Product Safety Commission to implement safety changes that would help keep this major public health threat at bay. |
Table saw finger remover
Missed a link
"Ed Pawlowski" wrote in message ... "Steve Barker" wrote Who is "THEY". I doubt seriously if 4000 fingers have been chopped off in the history of table saws total. Check out the chart on page 6 here http://www.cpsc.gov/library/foia/foia11/os/statsaws.pdf http://www.finewoodworking.com/item/...lesaw-injuries According to a recent study published in the Journal of Trauma, a professional journal for ER staff, roughly 31,400 people are treated in emergency rooms every year for tablesaw injuries. This is based on ER reports compiled from 1990 to 2007 and amazingly, that figure doesnt even include folks who are injured on the job. Those statistics are kept separate and arent included in the study. As you might imagine, roughly 93 percent of those injuries were to the users finger, thumb or another part of their hand. 66 percent of those injured had lacerations while 10 percent had amputations. Other types of injuries include soft-tissue injuries to the head, face and neck, presumably from flying lumber or debris caused by kickback. http://www.nclnet.org/health/99-safe...y-improvements Did you know that each year, tens of thousands of people are brutally injured by table saws €“ including 4,000 amputations €“ at a cost of more than $2 billion a year to treat victims? The National Consumers League is calling on the Consumer Product Safety Commission to implement safety changes that would help keep this major public health threat at bay. |
Table saw finger remover
On 6/20/2011 11:04 PM, Ed Pawlowski wrote:
"Steve Barker" wrote Who is "THEY". I doubt seriously if 4000 fingers have been chopped off in the history of table saws total. Check out the chart on page 6 here http://www.finewoodworking.com/item/...lesaw-injuries According to a recent study published in the Journal of Trauma, a professional journal for ER staff, roughly 31,400 people are treated in emergency rooms every year for tablesaw injuries. This is based on ER reports compiled from 1990 to 2007 and amazingly, that figure doesnt even include folks who are injured on the job. Those statistics are kept separate and arent included in the study. As you might imagine, roughly 93 percent of those injuries were to the users finger, thumb or another part of their hand. 66 percent of those injured had lacerations while 10 percent had amputations. Other types of injuries include soft-tissue injuries to the head, face and neck, presumably from flying lumber or debris caused by kickback. http://www.nclnet.org/health/99-safe...y-improvements Did you know that each year, tens of thousands of people are brutally injured by table saws €“ including 4,000 amputations €“ at a cost of more than $2 billion a year to treat victims? The National Consumers League is calling on the Consumer Product Safety Commission to implement safety changes that would help keep this major public health threat at bay. Agreed, not everyone should own a table saw. Very few people actually need them. I wonder if anyone has researched how many of the victims just bought the damn thing, or only used it once a year or so? And of course, how many were ever instructed properly on how to use them? I also wonder how many injuries were with 'real' table saws, and how many were with those tiny toys with the 18" square tables, that aren't useful for much more than building bird houses. (Try ripping a sheet of plywood on one of those tiny things, even with a helper.) -- aem sends... |
Table saw finger remover
In article ,
aemeijers wrote: I also wonder how many injuries were with 'real' table saws, and how many were with those tiny toys with the 18" square tables, that aren't useful for much more than building bird houses. (Try ripping a sheet of plywood on one of those tiny things, even with a helper.) When I was a kid I helped my dad with home improvement projects around the house. He had the only table saw I was ever afraid of. It was a circular saw that could be bolted to the bottom of a "table" that was a sheet metal frame about 12" tall. We ran it out in the driveway. The thing screamed and vibrated and rattled and I was sure it was going to kill us both. I know for sure it didn't have any guards, and I don't think it had a fence. My dad's only phillips screwdriver had 3 teeth and a bent shaft, and he built things with rusty old screws and bent nails that he "straightened" by hammering them against the concrete. I bring this up to substantiate my thought that the bearings in the saw hadn't seen any grease for 100 years. |
Table saw finger remover
On 6/20/2011 10:04 PM, Ed Pawlowski wrote:
"Steve Barker" wrote Who is "THEY". I doubt seriously if 4000 fingers have been chopped off in the history of table saws total. Check out the chart on page 6 here http://www.finewoodworking.com/item/...lesaw-injuries According to a recent study published in the Journal of Trauma, a professional journal for ER staff, roughly 31,400 people are treated in emergency rooms every year for tablesaw injuries. This is based on ER reports compiled from 1990 to 2007 and amazingly, that figure doesnt even include folks who are injured on the job. Those statistics are kept separate and arent included in the study. As you might imagine, roughly 93 percent of those injuries were to the users finger, thumb or another part of their hand. 66 percent of those injured had lacerations while 10 percent had amputations. Other types of injuries include soft-tissue injuries to the head, face and neck, presumably from flying lumber or debris caused by kickback. http://www.nclnet.org/health/99-safe...y-improvements Did you know that each year, tens of thousands of people are brutally injured by table saws €“ including 4,000 amputations €“ at a cost of more than $2 billion a year to treat victims? The National Consumers League is calling on the Consumer Product Safety Commission to implement safety changes that would help keep this major public health threat at bay. Yes, and all that is ASSUMING you BELIEVE all those reports. I don't. -- Steve Barker remove the "not" from my address to email |
Table saw finger remover
On 6/20/2011 10:05 PM, Ed Pawlowski wrote:
Missed a link No problem. I wasn't looking at them anyway. |
All times are GMT +1. The time now is 01:15 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter