Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Any ideas on a bench belt sander?
On 2/17/2011 7:17 PM, NSN wrote:
On Thu, 17 Feb 2011 16:29:15 -0600, "Bob-tx"No Spam no contact wrote: I had an el cheapo one inch wide belt, belt sander; no flat disk combination. I used it mostly for sharpening knives (carefully with the finest grit I could buy) and touch up on some scroll saw items. Bought the thing for $30 at one of these traveling tools shows that was going through town about five years ago. One of the plastic pulleys flew apart on it, so am going toss it. The motor is fine, anyone want a small electric motor? No charge. Want to get another one, and most are 4 inch belts with a disk sander on the side. That is fine, assuming I can get 400 grit or more sandpaper. Went to HD, and they had one (I forget the brand) for $120. I asked the manager for a discount. He acted insulted and asked why he should give me a discount. I counted them off for him: 1, because I am a nice guy; 2, because you are a nice guy; 3, because I am an old man; 4, because I'll buy it if you do. He told me he wouldn't even give his old man a discount on it. I told him I was going to buy it before he displayed that attitude. He obviously didn't care. I left. Go to your local post office and if they are not out, ask for a few change of address forms. Inside the nice little package you should find a 10 or 15% off coupon from Home' Depot. Wave the coupon in front of the obnoxious manager and buy the sander with the discount. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Any ideas on a bench belt sander? | Home Repair | |||
Any ideas on a bench belt sander? | Home Repair | |||
Any ideas on a bench belt sander? | Home Repair | |||
Any ideas on a bench belt sander? | Home Repair | |||
Any ideas on a bench belt sander? | Home Repair |