The OD of the plastic toilet seat hinge screws for my seat is 3/8". The
hole in the porcelain is larger than 1/2". The screws do not have a
shoulder washer to cause them to center in the hole. Why aren't the
holes closer to the right size?

"mcp6453" wrote in message
...
The OD of the plastic toilet seat hinge screws for my seat is 3/8". The
hole in the porcelain is larger than 1/2". The screws do not have a
shoulder washer to cause them to center in the hole. Why aren't the holes
closer to the right size?

Because they work just fine as is. I've never had a problem. Making ceramic
fixtures is not the same as machining metal and they allow a large tolerance
for many possible variations of attachments. If you have a problem, insert
a plastic sleeve or slip plastic tubing over the bolt.

My mom had bought removable toilet seats from Sears in the 1970s.
Other than cracking leg/bumpers they are still in great shape.
You can remove the entire seat and wash it once a month.

But I wonder why can't I just buy a set of hinges to make ANY seat
detachable? I have a hard enough time finding the same seats.

- = -
Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus, BioStrategist
http://www.panix.com/~vjp2/vasos.htm
---{Nothing herein constitutes advice. Everything fully disclaimed.}---
[Homeland Security means private firearms not lazy obstructive guards]
[Urb sprawl confounds terror] [Phooey on GUI: Windows for subprime Bimbos]