As I have mentioned here before, my father passed away in 1998. When we sorted
his things, I got a lot of tools and parts of various sorts. He was somewhat of
a hoarder although in his later years he had a regrettable tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.

Last night when I was going through some boxes, I found a Craftsman 572.610010
rotary tool. It looks like new. He probably never used it. When I turned it on,
it ran for a few seconds, and then the chuck stopped turning. The motor
continues to run just fine. The chuck is free-wheeling.

When I opened it, I found that there is a plastic or nylon sleeve that couples
the motor shaft to the chuck. It was completely disintegrated from age. The
problem now is that I cannot find a parts list or even a comparable parts lists
that shows the part. If I can't find the part number, there is no chance of
finding the part. It's probably not available anyway, but it's worth looking.

It looks like the trash can for this one.

I know that tools don't last forever, and I know that manufacturers cannot be
expected to supply parts forever, but what aggravates me is that the Sears parts
site does not even list the model.

Have you tried going to the local Sears Repair Center? I had an old
Sears saber saw and a drill that weren't listed on the Sears site, but
they were found by one of the staff at the local parts store. They
told me the website does not have all the data for some of the older
models, but they do maintain that on the internal Sears system.
'Hope that works for you.
Lee

On Jan 24, 4:01*pm, mcp6453 wrote:
As I have mentioned here before, my father passed away in 1998. When we sorted
his things, I got a lot of tools and parts of various sorts. He was somewhat of
a hoarder although in his later years he had a regrettable tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.

Last night when I was going through some boxes, I found a Craftsman 572.610010
rotary tool. It looks like new. He probably never used it. When I turned it on,
it ran for a few seconds, and then the chuck stopped turning. The motor
continues to run just fine. The chuck is free-wheeling.

When I opened it, I found that there is a plastic or nylon sleeve that couples
the motor shaft to the chuck. It was completely disintegrated from age. The
problem now is that I cannot find a parts list or even a comparable parts lists
that shows the part. If I can't find the part number, there is no chance of
finding the part. It's probably not available anyway, but it's worth looking.

It looks like the trash can for this one.

I know that tools don't last forever, and I know that manufacturers cannot be
expected to supply parts forever, but what aggravates me is that the Sears parts
site does not even list the model.

No, but I will. It appears that the unit was made by Dremel and private labeled
for Sears. Maybe I can get the part from Dremel.


On 1/24/2010 10:53 PM, Lee wrote:
Have you tried going to the local Sears Repair Center? I had an old
Sears saber saw and a drill that weren't listed on the Sears site, but
they were found by one of the staff at the local parts store. They
told me the website does not have all the data for some of the older
models, but they do maintain that on the internal Sears system.
'Hope that works for you.
Lee

On Jan 24, 4:01 pm, mcp6453 wrote:
As I have mentioned here before, my father passed away in 1998. When we sorted
his things, I got a lot of tools and parts of various sorts. He was somewhat of
a hoarder although in his later years he had a regrettable tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.

Last night when I was going through some boxes, I found a Craftsman 572.610010
rotary tool. It looks like new. He probably never used it. When I turned it on,
it ran for a few seconds, and then the chuck stopped turning. The motor
continues to run just fine. The chuck is free-wheeling.

When I opened it, I found that there is a plastic or nylon sleeve that couples
the motor shaft to the chuck. It was completely disintegrated from age. The
problem now is that I cannot find a parts list or even a comparable parts lists
that shows the part. If I can't find the part number, there is no chance of
finding the part. It's probably not available anyway, but it's worth looking.

It looks like the trash can for this one.

I know that tools don't last forever, and I know that manufacturers cannot be
expected to supply parts forever, but what aggravates me is that the Sears parts
site does not even list the model.

mcp6453 wrote the following:
No, but I will. It appears that the unit was made by Dremel and private labeled
for Sears. Maybe I can get the part from Dremel.


On 1/24/2010 10:53 PM, Lee wrote:

Have you tried going to the local Sears Repair Center? I had an old
Sears saber saw and a drill that weren't listed on the Sears site, but
they were found by one of the staff at the local parts store. They
told me the website does not have all the data for some of the older
models, but they do maintain that on the internal Sears system.
'Hope that works for you.
Lee

On Jan 24, 4:01 pm, mcp6453 wrote:

As I have mentioned here before, my father passed away in 1998. When we sorted
his things, I got a lot of tools and parts of various sorts. He was somewhat of
a hoarder although in his later years he had a regrettable tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.

Last night when I was going through some boxes, I found a Craftsman 572.610010
rotary tool. It looks like new. He probably never used it. When I turned it on,
it ran for a few seconds, and then the chuck stopped turning. The motor
continues to run just fine. The chuck is free-wheeling.

When I opened it, I found that there is a plastic or nylon sleeve that couples
the motor shaft to the chuck. It was completely disintegrated from age. The
problem now is that I cannot find a parts list or even a comparable parts lists
that shows the part. If I can't find the part number, there is no chance of
finding the part. It's probably not available anyway, but it's worth looking.

It looks like the trash can for this one.

I know that tools don't last forever, and I know that manufacturers cannot be
expected to supply parts forever, but what aggravates me is that the Sears parts
site does not even list the model.


The first 3 numbers (572.) of the model number for all Sears Craftsman
tools and appliances indicate the real manufacturer of the item.
Have you confirmed that 572 is for Dremel?

--

Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeroes after @

On 1/25/2010 7:32 AM, willshak wrote:

The first 3 numbers (572.) of the model number for all Sears Craftsman
tools and appliances indicate the real manufacturer of the item.
Have you confirmed that 572 is for Dremel?

No, I didn't know that. How can I confirm?

mcp6453 wrote the following:
On 1/25/2010 7:32 AM, willshak wrote:

The first 3 numbers (572.) of the model number for all Sears Craftsman
tools and appliances indicate the real manufacturer of the item.
Have you confirmed that 572 is for Dremel?


No, I didn't know that. How can I confirm?


It is a Dremel.
http://www.owwm.com/Craftsman/manufacturers.aspx?sort=1

--

Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeroes after @

Have some fun. Take it back to Sears, and watch their guys
do blank looks. Tell em, Dad might have bought it as
recently as last year.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
..


"mcp6453" wrote in message
...
As I have mentioned here before, my father passed away in
1998. When we sorted
his things, I got a lot of tools and parts of various sorts.
He was somewhat of
a hoarder although in his later years he had a regrettable
tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.

Last night when I was going through some boxes, I found a
Craftsman 572.610010
rotary tool. It looks like new. He probably never used it.
When I turned it on,
it ran for a few seconds, and then the chuck stopped
turning. The motor
continues to run just fine. The chuck is free-wheeling.

When I opened it, I found that there is a plastic or nylon
sleeve that couples
the motor shaft to the chuck. It was completely
disintegrated from age. The
problem now is that I cannot find a parts list or even a
comparable parts lists
that shows the part. If I can't find the part number, there
is no chance of
finding the part. It's probably not available anyway, but
it's worth looking.

It looks like the trash can for this one.

I know that tools don't last forever, and I know that
manufacturers cannot be
expected to supply parts forever, but what aggravates me is
that the Sears parts
site does not even list the model.

mcp6453 wrote:
As I have mentioned here before, my father passed away in 1998. When we sorted
his things, I got a lot of tools and parts of various sorts. He was somewhat of
a hoarder although in his later years he had a regrettable tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.

Last night when I was going through some boxes, I found a Craftsman 572.610010
rotary tool. It looks like new. He probably never used it. When I turned it on,
it ran for a few seconds, and then the chuck stopped turning. The motor
continues to run just fine. The chuck is free-wheeling.

When I opened it, I found that there is a plastic or nylon sleeve that couples
the motor shaft to the chuck. It was completely disintegrated from age. The
problem now is that I cannot find a parts list or even a comparable parts lists
that shows the part. If I can't find the part number, there is no chance of
finding the part. It's probably not available anyway, but it's worth looking.

It looks like the trash can for this one.

I know that tools don't last forever, and I know that manufacturers cannot be
expected to supply parts forever, but what aggravates me is that the Sears parts
site does not even list the model.

Can you get a nylon spacer (decent selection at lowes) and force it on
each end? Or if you need more flex, a heavy duty rubber gasoline or
transmission line with a small interior diameter may work. Or look at
Graingers, I'm sure they have lot's of motor couplers and one may work
better than the original. They normally are metal on each end and
rubber in the middle, with set screws on each metal end.

replying to mcp6453, Coolerman wrote:
mcp6453 wrote:

As I have mentioned here before, my father passed away in 1998. When we sorted
his things, I got a lot of tools and parts of various sorts. He was somewhat of
a hoarder although in his later years he had a regrettable tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.
Last night when I was going through some boxes, I found a Craftsman 572.610010
rotary tool. It looks like new. He probably never used it. When I turned it on,
it ran for a few seconds, and then the chuck stopped turning. The motor
continues to run just fine. The chuck is free-wheeling.
When I opened it, I found that there is a plastic or nylon sleeve that couples
the motor shaft to the chuck. It was completely disintegrated from age. The
problem now is that I cannot find a parts list or even a comparable parts lists
that shows the part. If I can't find the part number, there is no chance of
finding the part. It's probably not available anyway, but it's worth looking.
It looks like the trash can for this one.
I know that tools don't last forever, and I know that manufacturers cannot be
expected to supply parts forever, but what aggravates me is that the Sears
parts
site does not even list the model.

Simple fix! Just take the tool apart and take the piece with the chuck to any
auto parts store. Find the section where they sell clear plastic tubing and
find a tubing size that will fit snugly over the end if that piece where the
old sleeve fit. Buy a foot of that and when you get home cut a piece to length
and put it back together. Works like a charm! Though these are single speed
tools I have used this one a lot. It is actually well made.

--
posted from
http://www.homeownershub.com/mainten...an-421114-.htm
using HomeOwnersHub's Web, RSS and Social Media Interface
to home and garden related groups

This was originally posted in 2010....


On Sun, 14 Apr 2013 16:44:02 +0000, Coolerman
wrote:

replying to mcp6453, Coolerman wrote:
mcp6453 wrote:

As I have mentioned here before, my father passed away in 1998. When we sorted
his things, I got a lot of tools and parts of various sorts. He was somewhat of
a hoarder although in his later years he had a regrettable tendency to purchase
Taiwanese bargain bin tools instead of the good stuff.
Last night when I was going through some boxes, I found a Craftsman 572.610010
rotary tool. It looks like new. He probably never used it. When I turned it on,
it ran for a few seconds, and then the chuck stopped turning. The motor
continues to run just fine. The chuck is free-wheeling.
When I opened it, I found that there is a plastic or nylon sleeve that couples
the motor shaft to the chuck. It was completely disintegrated from age. The
problem now is that I cannot find a parts list or even a comparable parts lists
that shows the part. If I can't find the part number, there is no chance of
finding the part. It's probably not available anyway, but it's worth looking.
It looks like the trash can for this one.
I know that tools don't last forever, and I know that manufacturers cannot be
expected to supply parts forever, but what aggravates me is that the Sears
parts
site does not even list the model.

Simple fix! Just take the tool apart and take the piece with the chuck to any
auto parts store. Find the section where they sell clear plastic tubing and
find a tubing size that will fit snugly over the end if that piece where the
old sleeve fit. Buy a foot of that and when you get home cut a piece to length
and put it back together. Works like a charm! Though these are single speed
tools I have used this one a lot. It is actually well made.

replying to Ashton Crusher , dan wrote:
Ain't the interwebs great!! I was trying to fix my old backpack stove and
couldn't find a replacement fuel line. But I did find a discussion board
with other people who had the same problem. Turns out you can fix it with
a piece of 3/16 ID fuel tubing from AutoZone. but first you have to cut
off the crimped ends of the old hose with a cutoff wheel. So I got out my
old Sears rotary tool and halfway through the job it broke. Took it apart
and found the problem and started looking for the part, but found this
thread instead. An inch of the same fuel tubing I bought to fix the stove
worked for the rotary tool as well. Now I'll try to fire up the stove
without setting myself on fire. Wish me luck.

--
posted from
http://www.homeownershub.com/mainten...an-421114-.htm
using HomeOwnersHub's Web, RSS and Social Media Interface
to home and garden related groups

dan wrote:
replying to Ashton Crusher , dan wrote:
Ain't the interwebs great!! I was trying to fix my old backpack stove and
couldn't find a replacement fuel line. But I did find a discussion board
with other people who had the same problem. Turns out you can fix it with
a piece of 3/16 ID fuel tubing from AutoZone. but first you have to cut
off the crimped ends of the old hose with a cutoff wheel. So I got out my
old Sears rotary tool and halfway through the job it broke.

What broke? The rotary tool or what you were cutting?

Took it apart
and found the problem and started looking for the part, but found this
thread instead. An inch of the same fuel tubing I bought to fix the stove
worked for the rotary tool as well. Now I'll try to fire up the stove
without setting myself on fire. Wish me luck.



--
Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeros after @

replying to willshak , dan wrote:

willshak wrote:

What broke? The rotary tool or what you were cutting?
Took it apart

The rotary tool. Same failure mode others were discussing in this thread.
Coolerman suggested using tubing for the coupling, and it was a happy
coincidence that the tubing I bought for the stove worked for the tool.

--
posted from
http://www.homeownershub.com/mainten...an-421114-.htm
using HomeOwnersHub's Web, RSS and Social Media Interface
to home and garden related groups