Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
mounting tile vertically outside
Steve B wrote:
I have three Sonotubed rounds that are about 24" high, 30" diameter. They are exterior, and get snow and rain and direct sun. I would like to cover this now bare concrete. Ideally, I'd like to tile them using small tile, say 2" square, or smaller, or scraps, or odd rectangulars, and use some Mexican and unique 4x4 and 6x6 tiles we have. What type of mortar/grout/adhesive should I use so that they do not pop off with freeze thaw cycles? The usual - thinset. It freezes very seldom where I live but I see no reason why frequent freezing/thawing should affect adherance of the tiles. Bricks are fastened to lots of things, ever see a pile of bricks at the bottom of a wall after a freeze? -- dadiOH ____________________________ dadiOH's dandies v3.06... ....a help file of info about MP3s, recording from LP/cassette and tips & tricks on this and that. Get it at http://mysite.verizon.net/xico |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mounting horizontal radiator vertically... is it possible? | UK diy | |||
Floor mounting Wall mounting Boiler (Combi) | UK diy | |||
Drilling vertically | UK diy | |||
NEC 3D image collapsed vertically | Electronics Repair |