Oren wrote:
On Thu, 17 Apr 2008 22:22:20 -0500, "HeyBub"
wrote:

You can't rip with a miter saw.

Sure for a short piece. I will rip what can and then finish the radius
(outside bull nose corner) with a jig saw. These are short pieces of
wood flooring.

There is a serious danger, though! Not all rips are secure against
the saw fence (tapered cuts for the final inch or two of wood
flooring).

My finish blades don't *recommend* the blade for ripping :-/

Ah, okay. My flooring planks were four feet long. Ripping 10" at each end
still left more than two feet to do with a jig saw.