Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 6
Default Hot Tub Repair or Advice Needed

I have a ten-year-old Balboa hot tub that has served us well but required
numerous repairs over the years. The hot tub technician would come, replace
parts, and present us with bills for hundreds of dollars. After a while I
started to do my own repairs, replacing the controller and the pump. (I can
turn a wrench.) I replaced the pump. Now the hot tub has quit again and the
tech tells me the pump needs to be replaced. This would be about he fourth
one. Motor and wet end. The techs are very condescending. I have had it
looked at by three different guys and none of them will specify whether the
problem is with the motor or the wet end or both or something else. Just
says whole the whole unit for about $350 to $500 depending on which one I
have asked. I can get a motor and wet end for this on eBay for about $170. I
am sick of this conflicting advice. I would like to work with an HONEST
technician who could tell me which part(s) have failed and why. I am in
Noreth Georgia. Any advice on how I could these parts tested or reputable
techs would be appreciated.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Repair/replace Advice Needed Mitchell Freeman Electronics Repair 2 May 3rd 13 04:46 AM
electric pump repair advice needed Xiongnu Electronics Repair 7 June 27th 05 03:50 AM
Monitor Repair Advice Needed James Hahn Electronics Repair 5 May 15th 05 05:52 AM
Advice/help needed regarding hypothetical DVD player repair TYT-Carrie Electronics Repair 20 April 5th 04 06:46 AM
Advice needed on steam engine repair John Noid Metalworking 5 February 20th 04 03:15 AM


All times are GMT +1. The time now is 05:42 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"