Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,940
Default Electric motor

I replaced the electric motor on my pool pump a couple days ago.

After looking over the document that came with it I now see:

"Temperature around the motor should not exceed 104°F ..."

Well dang. I live in the desert and many days are 110° in the shade
during Summer On July 4th it was 116°. Homes around here don't have
pump houses and motors are exposed to the extreme heat. Granted, the
motor will not run all day in the Summer.

So, is this upper temp limit the maximum range for continuous/constant
operation or a point when serious damage starts to happen?

The motor has an auto thermal protection. Would this trip motor in
extreme heat like we have?

Thanks,

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 4,926
Default Electric motor

On Nov 1, 2:37 pm, Oren wrote:
I replaced the electric motor on my pool pump a couple days ago.

After looking over the document that came with it I now see:

"Temperature around the motor should not exceed 104°F ..."

Well dang. I live in the desert and many days are 110° in the shade
during Summer On July 4th it was 116°. Homes around here don't have
pump houses and motors are exposed to the extreme heat. Granted, the
motor will not run all day in the Summer.

So, is this upper temp limit the maximum range for continuous/constant
operation or a point when serious damage starts to happen?

The motor has an auto thermal protection. Would this trip motor in
extreme heat like we have?

Thanks,

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."


Wouldnt the pump pumping cool water help cool it, if it has thermal
protection dont worry id say.

  #3   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,940
Default Electric motor

On Thu, 01 Nov 2007 16:19:08 -0400, Meat Plow
wrote:

On Thu, 01 Nov 2007 11:37:50 -0800, Oren wrote:

I replaced the electric motor on my pool pump a couple days ago.

After looking over the document that came with it I now see:

"Temperature around the motor should not exceed 104°F ..."


Motor make and model please?


Emerson EB842 1.5 HP, PH 1, Volts 208-230, HZ 60

(*emersonmotors.com)

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."
  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 14,845
Default Electric motor

On Nov 1, 3:37 pm, Oren wrote:
I replaced the electric motor on my pool pump a couple days ago.

After looking over the document that came with it I now see:

"Temperature around the motor should not exceed 104°F ..."

Well dang. I live in the desert and many days are 110° in the shade
during Summer On July 4th it was 116°. Homes around here don't have
pump houses and motors are exposed to the extreme heat. Granted, the
motor will not run all day in the Summer.

So, is this upper temp limit the maximum range for continuous/constant
operation or a point when serious damage starts to happen?

The motor has an auto thermal protection. Would this trip motor in
extreme heat like we have?

Thanks,

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."


I replaced the electric motor on my pool pump a couple days ago.

Please don't take this the wrong way, but you suck!

I've been holding back turning on the furnace since it's only October.
(Yeah, I know it's now November)

The house has occasionally dipped below the point where the furnace
should fire up, but extra blankets and sweatshirts have worked so far.

Swim a lap for me, will ya?

  #5   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,185
Default Electric motor

DerbyDad03 wrote:

Please don't take this the wrong way, but you suck!

I've been holding back turning on the furnace since it's only October.
(Yeah, I know it's now November)


You suck too. We've had our furnace on for over a month already,
otherwise it would be WELL below comfortable. (High today of 7C/45F,
and they're saying a low of -10C/14F on Monday.)

Chris


  #6   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,940
Default Electric motor

On Thu, 01 Nov 2007 16:38:16 -0500, wrote:

On Thu, 01 Nov 2007 11:37:50 -0800, Oren wrote:

I replaced the electric motor on my pool pump a couple days ago.

After looking over the document that came with it I now see:

"Temperature around the motor should not exceed 104°F ..."

Well dang. I live in the desert and many days are 110° in the shade
during Summer On July 4th it was 116°. Homes around here don't have
pump houses and motors are exposed to the extreme heat. Granted, the
motor will not run all day in the Summer.

So, is this upper temp limit the maximum range for continuous/constant
operation or a point when serious damage starts to happen?

The motor has an auto thermal protection. Would this trip motor in
extreme heat like we have?

Thanks,


Simply another reason to keepo your pool euipment under cover. The sun
beating on a black pool motor will make it hotter than the ambient air
temp. That will make it burn out quicker.
... which prompts the question, what was wrong with the original
motor?


The motor was 12 years old and original. For the few years I've owned
the house I fixed or replaced parts in the pump, as needed. I fixed
the pump this time - shaft seal and saw where water had rusted the
front shaft bearing...thus the awful noisy sound.

The new motor should be more efficient, but certainly has less noise.

Had it been a dog making this sound, I would shot it on the spot

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."
  #7   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,940
Default Electric motor

On Thu, 01 Nov 2007 16:48:05 -0400, Meat Plow
wrote:

On Thu, 01 Nov 2007 12:31:42 -0800, Oren wrote:

On Thu, 01 Nov 2007 16:19:08 -0400, Meat Plow
wrote:

On Thu, 01 Nov 2007 11:37:50 -0800, Oren wrote:

I replaced the electric motor on my pool pump a couple days ago.

After looking over the document that came with it I now see:

"Temperature around the motor should not exceed 104°F ..."

Motor make and model please?


Emerson EB842 1.5 HP, PH 1, Volts 208-230, HZ 60

(*emersonmotors.com)


The 56 series B842 has a full load ambient rating of 50 degrees Centigrade
which is 122 F.


Thank you. It's cooler here than Death Valley, CA

I guess by series, you mean 56Y (frame 6.5" dia.)


--
Oren

"If things get any worse, I'll have to ask you to stop helping me."
  #8   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,940
Default Electric motor

On Thu, 01 Nov 2007 13:46:16 -0700, DerbyDad03
wrote:

On Nov 1, 3:37 pm, Oren wrote:
I replaced the electric motor on my pool pump a couple days ago.

After looking over the document that came with it I now see:

"Temperature around the motor should not exceed 104°F ..."

Well dang. I live in the desert and many days are 110° in the shade
during Summer On July 4th it was 116°. Homes around here don't have
pump houses and motors are exposed to the extreme heat. Granted, the
motor will not run all day in the Summer.

So, is this upper temp limit the maximum range for continuous/constant
operation or a point when serious damage starts to happen?

The motor has an auto thermal protection. Would this trip motor in
extreme heat like we have?

Thanks,


I replaced the electric motor on my pool pump a couple days ago.

Please don't take this the wrong way, but you suck!

I've been holding back turning on the furnace since it's only October.
(Yeah, I know it's now November)

The house has occasionally dipped below the point where the furnace
should fire up, but extra blankets and sweatshirts have worked so far.

Swim a lap for me, will ya?


GRIN I might get one more jump in the pool. I have solar heat and
we are getting COLD. Below 90° and my nips get hard :-/

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."
  #9   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 14,845
Default Electric motor

On Nov 1, 5:11 pm, Oren wrote:
On Thu, 01 Nov 2007 13:46:16 -0700, DerbyDad03
wrote:





On Nov 1, 3:37 pm, Oren wrote:
I replaced the electric motor on my pool pump a couple days ago.


After looking over the document that came with it I now see:


"Temperature around the motor should not exceed 104°F ..."


Well dang. I live in the desert and many days are 110° in the shade
during Summer On July 4th it was 116°. Homes around here don't have
pump houses and motors are exposed to the extreme heat. Granted, the
motor will not run all day in the Summer.


So, is this upper temp limit the maximum range for continuous/constant
operation or a point when serious damage starts to happen?


The motor has an auto thermal protection. Would this trip motor in
extreme heat like we have?


Thanks,


I replaced the electric motor on my pool pump a couple days ago.


Please don't take this the wrong way, but you suck!


I've been holding back turning on the furnace since it's only October.
(Yeah, I know it's now November)


The house has occasionally dipped below the point where the furnace
should fire up, but extra blankets and sweatshirts have worked so far.


Swim a lap for me, will ya?


GRIN I might get one more jump in the pool. I have solar heat and
we are getting COLD. Below 90° and my nips get hard :-/

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."- Hide quoted text -

- Show quoted text -


...and my nips get hard

Uh thanks...that was a visual I did not need.

  #10   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,940
Default Electric motor

On Thu, 01 Nov 2007 16:30:48 -0700, DerbyDad03
wrote:

On Nov 1, 5:11 pm, Oren wrote:
On Thu, 01 Nov 2007 13:46:16 -0700, DerbyDad03
wrote:





On Nov 1, 3:37 pm, Oren wrote:
I replaced the electric motor on my pool pump a couple days ago.


After looking over the document that came with it I now see:


"Temperature around the motor should not exceed 104°F ..."


Well dang. I live in the desert and many days are 110° in the shade
during Summer On July 4th it was 116°. Homes around here don't have
pump houses and motors are exposed to the extreme heat. Granted, the
motor will not run all day in the Summer.


So, is this upper temp limit the maximum range for continuous/constant
operation or a point when serious damage starts to happen?


The motor has an auto thermal protection. Would this trip motor in
extreme heat like we have?


Thanks,


I replaced the electric motor on my pool pump a couple days ago.


Please don't take this the wrong way, but you suck!


I've been holding back turning on the furnace since it's only October.
(Yeah, I know it's now November)


The house has occasionally dipped below the point where the furnace
should fire up, but extra blankets and sweatshirts have worked so far.


Swim a lap for me, will ya?


GRIN I might get one more jump in the pool. I have solar heat and
we are getting COLD. Below 90° and my nips get hard :-/


...and my nips get hard

Uh thanks...that was a visual I did not need.


A joke. Folks ask how I live in the desert. Below 90° it gets cooled
off..

--
Oren

"If things get any worse, I'll have to ask you to stop helping me."
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dimmer on an electric motor? SteveB Metalworking 3 September 10th 07 05:26 PM
Electric Motor Problem Home Repair 12 January 29th 07 11:09 PM
electric motor help William Wixon Metalworking 9 February 24th 06 04:50 AM
Model-T Electric Motor Kim Sleep Electronics Repair 3 May 7th 05 01:45 AM
How to identify electric motor Nick Brooks UK diy 4 December 8th 04 09:50 AM


All times are GMT +1. The time now is 08:44 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"