Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Engineered wood Floor
I live in an old Victorian property. The floor is pine boards. I
want to lay an engineered wood floor but there is a dip of about 5-10mm at the foot of the stairs. I have been told that if I don't nail this area but just leave it, the board will settle over time. Is that right or should I put some battens down? |
#2
Posted to alt.home.repair
|
|||
|
|||
Engineered wood Floor
Griffo wrote:
I live in an old Victorian property. The floor is pine boards. I want to lay an engineered wood floor but there is a dip of about 5-10mm at the foot of the stairs. I have been told that if I don't nail this area but just leave it, the board will settle over time. Is that right or should I put some battens down? Depending on what the engineered flooring is, it might, but more likely it won't--at least in a way you want it to. At best it might simply flex a little, at worst it will crack the laminate, in the middle it'll not only flex but squeak besides. Need to have a level, smooth subfloor. Consult the manufacturer's instructions for how to lay the product. -- |
#3
Posted to alt.home.repair
|
|||
|
|||
Engineered wood Floor
"Griffo" wrote in message oups.com... I live in an old Victorian property. The floor is pine boards. I want to lay an engineered wood floor but there is a dip of about 5-10mm at the foot of the stairs. I have been told that if I don't nail this area but just leave it, the board will settle over time. Is that right or should I put some battens down? The board will not settle over time. It may bend and flex, but it is going to pop back up just about forever. I'd put a shim of some sort or replace that one or two boards that dip. 10mm is fairly deep. Bondo may do hte job. |
#4
Posted to alt.home.repair
|
|||
|
|||
Engineered wood Floor
"Griffo" wrote in message
oups.com... I live in an old Victorian property. The floor is pine boards. I want to lay an engineered wood floor but there is a dip of about 5-10mm at the foot of the stairs. I have been told that if I don't nail this area but just leave it, the board will settle over time. Is that right or should I put some battens down? A shame to have to cover an original pine floor. Sounds like it's in keeping with the design of the place. We pulled up the edge of an old carpet in our 1908 Portland home and found what looked like fir plank flooring. My wife was ecstatic. Another few feet of carpet pulling and we discovered the contractor who had flipped the place had taken the nicest fir out and replaced it with a hodgepodge of flooring materials. He probably has a lovely floor now. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Engineered Wood Floor | UK diy | |||
Engineered wood floor in basement | Home Repair | |||
engineered wood floor in basement | Home Repair | |||
Laminate floor and engineered wood | Home Repair | |||
Solid wood floor vs. engineered wood | Woodworking |