Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
Need easy way to remove cement from plywood floor.
|
#2
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
How thick? |
#3
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
On Oct 10, 5:50 am, "rjsechio" u38127@uwe wrote:
Need easy way to remove cement from plywood floor. Safety glasses and a BFH |
#4
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
"rjsechio" u38127@uwe wrote in message news:7979d249dc6c2@uwe... Need easy way to remove cement from plywood floor. Did this a few years ago on a good size second floor enclosed sun room. Up to 4" thick and about 6 yards of concrete. Its not like a driveway where heavy equipment could be used. Much manual labor and had to carry it out piece by piece so wasn't easy or fast. |
#5
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
RayV wrote:
Need easy way to remove cement from plywood floor. Safety glasses and a BFH Best answer yet. My arms are killing me. Thanks , I had a feeling that was going to be the answer. -- Message posted via HomeKB.com http://www.homekb.com/Uwe/Forums.aspx/repair/200710/1 |
#6
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
I removed tile and the cement on the plywood is about 1/16 to 1/8 thick.
wrote: How thick? -- Message posted via HomeKB.com http://www.homekb.com/Uwe/Forums.aspx/repair/200710/1 |
#7
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
"rjsechio via HomeKB.com" u38127@uwe wrote in message news:797fb03f0e2d1@uwe... I removed tile and the cement on the plywood is about 1/16 to 1/8 thick. wrote: How thick? http://www.harborfreight.com/cpi/cta...emnumber=37073 Bob |
#8
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
angle grinder with black composite disk
|
#9
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
Thanks Rudy
Rudy wrote: angle grinder with black composite disk -- Message posted via HomeKB.com http://www.homekb.com/Uwe/Forums.aspx/repair/200710/1 |
#10
Posted to alt.home.repair
|
|||
|
|||
remove cement from plywood flor
http://www.harborfreight.com/cpi/cta...emnumber=37073 Bob I was looking at this myself but it might need a big ass compressor to run it as I believe published psi and cfm is minimum. I got their little air grinder and my 230V compressor just barely keep up - just surprised how much air volume those things need. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
how to remove cement / adhesive from ceramic tile before re-attaching it to floor | Home Repair | |||
Remove or re-use cement front door stairs? | Home Repair | |||
How does one remove spray paint from brick and cement | Home Repair | |||
Remove cement/mortar from tarred driveway ? | UK diy | |||
How to remove cement grout from tiles | UK diy |