Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Whirlpool washer tub noise on spin cycle
Hi. I have a Whirlpool direct drive washer (LSR7233EQ0) that makes a
noise on spin that sounds like "zzzzp, zzzzp, zzzzp", which gets louder as it spins faster, then a loud "CLUNK", then it starts the zzzp zzzzp noise again. The top of the agitator moves about a half- inch side-to-side while it's spinning - i.e., the path of it's spinning inscribes a circle about a half-inch larger in diameter than it is (does that make sense)? If I physically hold the top of the agitator, allowing it to spin, but not wobble, the noise all but disappears (and there's no CLUNK every so often). Sooooo, I think it's probably something in the tub's coupling to the drive shaft, the drive block, perhaps? Does that sound like a likely culprit? I need the spanner tool to get the tub off, right? Is there any way to substitute for that? I tired a hammer and stubby flat-blade screwdriver, but it seems to be on there pretty tight. I hate to spend $20 on a tool I'll likely only use once (anyone want to buy a slightly used spanner tool?). At least it's still a whole lot cheaper than paying someone else to do it for me! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Whirlpool Washer Spin Cycle Repair | Home Repair | |||
whirlpool direct drive washer - spin cycle broken : | Home Repair | |||
Whirlpool LBR4132HQ0 washer - noise after spinning cycle stops | Home Repair | |||
Whirlpool washer vibrating after spin cycle. | Home Repair | |||
Whirlpool washing machine - won't cycle to rinse/spin | Home Repair |