Hi,
Recently, the Video Label on my Sony Wega KV-32FS100 will not go
away. I press Display on the remote repeatadly and nothing happens.
I've tried
to go into the menu Setup Video Label dialog but I can only change
the type of label that is displayed (LD, Line1, Satellite, DVD...) but
cannot make it go away. I also tried removing all the components and
also tried to Reset the TV without any
resolution. Please help... this is driving me nuts.

Any advice is much appreciated.
Best regards,
KK

wrote:
Hi,
Recently, the Video Label on my Sony Wega KV-32FS100 will not go
away. I press Display on the remote repeatadly and nothing happens.
I've tried
to go into the menu Setup Video Label dialog but I can only change
the type of label that is displayed (LD, Line1, Satellite, DVD...) but
cannot make it go away. I also tried removing all the components and
also tried to Reset the TV without any
resolution. Please help... this is driving me nuts.

Any advice is much appreciated.
Best regards,
KK

have you tried unplugging the tv then plug it back in? This happened to
me with my vega. The display button on the remote was sticking / not
working. Try another remote in one of your components thats compatible
with the vega. I tossed the remote for the tv away (200.00 for a new
one) and now use the amp remote for all.

wrote in message
ups.com...

wrote:
Hi,
Recently, the Video Label on my Sony Wega KV-32FS100 will not go
away. I press Display on the remote repeatadly and nothing happens.
I've tried
to go into the menu Setup Video Label dialog but I can only change
the type of label that is displayed (LD, Line1, Satellite, DVD...) but
cannot make it go away. I also tried removing all the components and
also tried to Reset the TV without any
resolution. Please help... this is driving me nuts.

Any advice is much appreciated.
Best regards,
KK

have you tried unplugging the tv then plug it back in? This happened to
me with my vega. The display button on the remote was sticking / not
working. Try another remote in one of your components thats compatible
with the vega. I tossed the remote for the tv away (200.00 for a new
one) and now use the amp remote for all.

Uh, those remotes are often repairable, you know. (I am assumming one of the
rubber-button models?) Just snap or unscrew the case apart, and remove and
clean the rubber sheet with the buttons, and gently clean the the black
spots on the circuit board with a pencil eraser. I've brough back lots of
'dead' remotes that way.

aem sends...

Yes, I tried unplugging the TV overnight and plugging it back in. I
also confirmed that the display button on my remote is not the problem
by using it on my other Sony TV.... it works just fine. I've narrowed
the problem down to the TV. Still no idea what it could be.

Regards,
KK

wrote:
wrote:
Hi,
Recently, the Video Label on my Sony Wega KV-32FS100 will not go
away. I press Display on the remote repeatadly and nothing happens.
I've tried
to go into the menu Setup Video Label dialog but I can only change
the type of label that is displayed (LD, Line1, Satellite, DVD...) but
cannot make it go away. I also tried removing all the components and
also tried to Reset the TV without any
resolution. Please help... this is driving me nuts.

Any advice is much appreciated.
Best regards,
KK

have you tried unplugging the tv then plug it back in? This happened to
me with my vega. The display button on the remote was sticking / not
working. Try another remote in one of your components thats compatible
with the vega. I tossed the remote for the tv away (200.00 for a new
one) and now use the amp remote for all.