No water flowing onto the pad

Vick

vjensen71 wrote:
No water flowing onto the pad

Vick


There is an orifice regulating flow
which may be clogged with minerals.
Or inlet control not operating.

http://www.aprilaire.com/index.php?z...on=OwnerCenter

"vjensen71" writes:

No water flowing onto the pad

Possible causes:

Water supply off.

Solenoid not receiving electrical signal to open.

Solenoid bustimicated.

Outlet orifice clogged with mineral deposits.

Caveat: experience with another aprilaire unit, and I didn't look up your unit specifically.


--
Todd H.
http://www.toddh.net/

Todd H. wrote:
"vjensen71" writes:

No water flowing onto the pad

Possible causes:

Water supply off.

Solenoid not receiving electrical signal to open.

Solenoid bustimicated.

Outlet orifice clogged with mineral deposits.

Caveat: experience with another aprilaire unit, and I didn't look up your unit specifically.


--
Todd H.
http://www.toddh.net/


There is also a fine screen filter on the incoming side of the
solenoid. But to get it out, you usually wind up trashing it, so you
should have a spare. Arnold Service Co on the internet sells them as
well as the orifice. I'd start by measuring the voltage on the
solenoid, or listening for it to click.

Bummer.

--

Christopher A. Young
You can't shout down a troll.
You have to starve them.
..

"vjensen71" wrote in message
news:da3a600ec5f2121b5b1d95aba2a47915@homerepairli ve.com...
No water flowing onto the pad

Vick