Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
EmberGlow Gas Logs
Anyone had any experience with the EmberGlow brand of vent-free Natural
Gas Logs? Believe they used to be sold by Home Depot. Specfically interested in the 24" Model CLVT24NG. TIA |
#2
Posted to alt.home.repair
|
|||
|
|||
EmberGlow Gas Logs
I thoroughly enjoy a vent-free Propane gas log/fireplace combination that I
bought from the Home Depot last winter. I use it in my sunroom. The gas log and fan work fine, and the finish is holding up to the light use it receives. It rattles as it transitions from one stable temperature to another, but it only lasts a few minutes so isn't a big deal. You won't confuse it with a vermont castings units, but you won't confus the $1500 I saved with an empty bank account, either. Peter "gwtx2" wrote in message oups.com... Anyone had any experience with the EmberGlow brand of vent-free Natural Gas Logs? Believe they used to be sold by Home Depot. Specfically interested in the 24" Model CLVT24NG. TIA |
#3
Posted to alt.home.repair
|
|||
|
|||
EmberGlow Gas Logs
Well, I tried a set of vent-free Comfort Glow NG from Home Depot, and
the odor was unbearable (a kerosene like smell) which filled the room. This was not odor due to the "new burning off". These were returned to the store. Before, I had a set of vent-free Martin propane logs. I switched over to NG when the gas company came through the neighborhood with new service. After returning the Comfort Glow's, I purchased a set of ventfree Martin NG logs ($200 more than the Comfort Glow). The odor from these is barely noticeable. You get what you pay for. El Penguini wrote: I thoroughly enjoy a vent-free Propane gas log/fireplace combination that I bought from the Home Depot last winter. I use it in my sunroom. The gas log and fan work fine, and the finish is holding up to the light use it receives. It rattles as it transitions from one stable temperature to another, but it only lasts a few minutes so isn't a big deal. You won't confuse it with a vermont castings units, but you won't confus the $1500 I saved with an empty bank account, either. Peter "gwtx2" wrote in message oups.com... Anyone had any experience with the EmberGlow brand of vent-free Natural Gas Logs? Believe they used to be sold by Home Depot. Specfically interested in the 24" Model CLVT24NG. TIA |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Venting gas logs? ? ? | Home Repair | |||
Need advice/recommendations on Gas Logs (natural gas) ? | Home Repair | |||
Peterson Gas Logs | Woodworking | |||
help - gas logs | Home Repair | |||
Gas logs | Home Repair |