I finally got the pilot to stay lit on my ventless gas logs, now I cant get
the burner to light. It appears that the gas does not turn on to the
burner, altho the pilot is lit. The logs will not light whether I flip the
switch manually or use the remote. Any ideas? thanks in advance.

Dan-o wrote:
I finally got the pilot to stay lit on my ventless gas logs, now I
cant get the burner to light. It appears that the gas does not turn
on to the burner, altho the pilot is lit. The logs will not light
whether I flip the switch manually or use the remote. Any ideas?
thanks in advance.

Did you turn the switch from pilot to on when you were finished lighting
the pilot? I am guessing that since you have a remote, that switch and the
"manual" switch both operate a second valve, but the primary valve is still
set to pilot.

--
Joseph Meehan

26 + 6 = 1 It's Irish Math