I made an unsettling discovery a few weeks ago - my kitchen drain has
been totally disconnected from the sewer lateral for several years! I
called some companies and got a ballpark figure to do a trenchless sewer
line job and will get more estimates. The camera showed cracks and
partial breaks in the lateral, but it looks like the only complete
rupture is with the kitchen drain.

However, I plan to have my foundation replaced within the next 9 months
or so, and am thinking it might be better to do the sewer lines either
at the same time or after the foundation.

So, I'm wondering about making a temporary fix for the kitchen sink
(I've been washing my pots, pans and dishes in the bathroom).

The kitchen sink drain is galvanized (1.25", I assume) and the pipe as
it comes out of the wall on the outside is encased in concrete. It
simply terminates about 1 foot from an open terra cotta pipe that has a
wide bellshaped female end, that obviously accepts a male terra cotta
pipe. I figure I can make some kind of temporary connection of the
galvanized to this terra cotta. Whatever I use has to make some pretty
big bends (and be 12-15 inches or so long). I might have to get a hose
that fits inside the galvanized and then mate that somehow with the
terra cotta. Any ideas? Thanks!

Dan

Dan_Musicant wrote:
I made an unsettling discovery a few weeks ago - my kitchen drain has
been totally disconnected from the sewer lateral for several years! I
called some companies and got a ballpark figure to do a trenchless sewer
line job and will get more estimates. The camera showed cracks and
partial breaks in the lateral, but it looks like the only complete
rupture is with the kitchen drain.

However, I plan to have my foundation replaced within the next 9 months
or so, and am thinking it might be better to do the sewer lines either
at the same time or after the foundation.

So, I'm wondering about making a temporary fix for the kitchen sink
(I've been washing my pots, pans and dishes in the bathroom).

The kitchen sink drain is galvanized (1.25", I assume) and the pipe as
it comes out of the wall on the outside is encased in concrete. It
simply terminates about 1 foot from an open terra cotta pipe that has a
wide bellshaped female end, that obviously accepts a male terra cotta
pipe. I figure I can make some kind of temporary connection of the
galvanized to this terra cotta. Whatever I use has to make some pretty
big bends (and be 12-15 inches or so long). I might have to get a hose
that fits inside the galvanized and then mate that somehow with the
terra cotta. Any ideas? Thanks!

Dan

The Galv would be 1 1/2" (if not 2")trade size.

Get a 1 1/2" Fernco coupling (at BigBox).
Grab a handful of 1 1/2" PVC fittings whilst there.
And PVC pipe.
Or.....they may have a selection of flexible tubing,
sold by the foot. Just drop the pipe or tube
down into the clay pipe.

Scout around the store for ideas.

Jim

On Thu, 09 Nov 2006 17:17:19 GMT, Speedy Jim wrote:

: The Galv would be 1 1/2" (if not 2")trade size.
:
: Get a 1 1/2" Fernco coupling (at BigBox).
: Grab a handful of 1 1/2" PVC fittings whilst there.
: And PVC pipe.
: Or.....they may have a selection of flexible tubing,
: sold by the foot. Just drop the pipe or tube
: down into the clay pipe.
:
: Scout around the store for ideas.
:
:Jim

Thanks. I'm printing this out and will bring to the store. I assume by
BigBox you mean Home Depot, Lowes, or similar?

I don't know (doubt it) if I got the idea across, but the galvanized
pipe is so encrusted with concrete that unless I remove that with a cold
chisel, there's no way I can get a coupling around the galvanized pipe.
The concrete on there is humongous. That's why I had the idea of shoving
some tubing of some kind INSIDE the galvanized. Or, I can try to get the
concrete off. But I'm afraid the galvanized would break. Probably very
old stuff and fragile.

Thanks again.

Dan

BTW, what do you make of my idea that the sewer line replacement should
maybe wait until the foundation job or after? The sewer line guy I had
come over said he thought it likely not necessary, but he wasn't
necessarily impatial.

Dan_Musicant wrote:
On Thu, 09 Nov 2006 17:17:19 GMT, Speedy Jim wrote:

: The Galv would be 1 1/2" (if not 2")trade size.
:
: Get a 1 1/2" Fernco coupling (at BigBox).
: Grab a handful of 1 1/2" PVC fittings whilst there.
: And PVC pipe.
: Or.....they may have a selection of flexible tubing,
: sold by the foot. Just drop the pipe or tube
: down into the clay pipe.
:
: Scout around the store for ideas.
:
:Jim

Thanks. I'm printing this out and will bring to the store. I assume by
BigBox you mean Home Depot, Lowes, or similar?

I don't know (doubt it) if I got the idea across, but the galvanized
pipe is so encrusted with concrete that unless I remove that with a cold
chisel, there's no way I can get a coupling around the galvanized pipe.
The concrete on there is humongous. That's why I had the idea of shoving
some tubing of some kind INSIDE the galvanized. Or, I can try to get the
concrete off. But I'm afraid the galvanized would break. Probably very
old stuff and fragile.

Thanks again.

Dan

BTW, what do you make of my idea that the sewer line replacement should
maybe wait until the foundation job or after? The sewer line guy I had
come over said he thought it likely not necessary, but he wasn't
necessarily impatial.

Ah. You may be on the right track to stuff a tube inside the Galv.
It's only temporary. Yes, Home Depot et al.

I would co-ordinate the sewer line with the foundation work.
Or, at least the part of it that will intrude on the foundation.

Jim

On Thu, 09 Nov 2006 23:05:35 GMT, Speedy Jim wrote:

: BTW, what do you make of my idea that the sewer line replacement should
: maybe wait until the foundation job or after? The sewer line guy I had
: come over said he thought it likely not necessary, but he wasn't
: necessarily impatial.
:
: Ah. You may be on the right track to stuff a tube inside the Galv.
: It's only temporary. Yes, Home Depot et al.
:
: I would co-ordinate the sewer line with the foundation work.
: Or, at least the part of it that will intrude on the foundation.
:
:Jim

Yeah, not sure how much it will intrude on the foundation job. I'm
anticipating talking to some foundation contractors very shortly, so
that will be one of the topics of discussion.

I went on over to the local contractor's supply True Value hardware and
like you said, scouted around and I found something I thought would
work. It's a piece of 1 1/2 inch plastic gray tubing, solid stuff, about
15 inches long and bent in a gentle sweep. I figured it was just about
perfect. The inside diameter of the galvanized is about 2", and the
outside diameter of this bent plastic is a bit under 2", so I figured it
would fit inside. The problems a

1. sealing this
2. Whether or not the terra cotta has enough slope so the drain water
won't come out the bell end.

I propped up the terra cotta as much as I could by just shoving dirt
under it (there was a fair amount of play in there).

For sealing, I had an old 1/2 used tube of Lexel that had been sitting
around a couple of years. The stuff is 1/2 solid but still flexible and
moldable, and I put a giant wad around the perimeter of the bent plastic
before shoving it up into the galvanized.

I'll let it set a day or two before testing the drain! This might keep
me set until the foundation job. If the foundation guys tell me it
really doesn't matter, I'll have the drain guys have at it, trenchless.
The lateral is under my concrete driveway, so I figure trenchless is the
way to go. The ballpark figure the first guy gave me was $4000 and he
said they'd consider discounting if I get a better bid.

Thanks for the help.

Dan

On Thu, 09 Nov 2006 23:05:35 GMT, Speedy Jim wrote:

: Ah. You may be on the right track to stuff a tube inside the Galv.
: It's only temporary. Yes, Home Depot et al.
:
: I would co-ordinate the sewer line with the foundation work.
: Or, at least the part of it that will intrude on the foundation.
:
:Jim

Here's a couple of screen shots:

Disconnected drain:
http://fox302.com/userdata/Muse/file...cteddrain2.jpg

Jury rigged drain:
http://fox302.com/userdata/Muse/file...iggeddrain.jpg

Dan

Dan_Musicant wrote:
On Thu, 09 Nov 2006 23:05:35 GMT, Speedy Jim wrote:

: Ah. You may be on the right track to stuff a tube inside the Galv.
: It's only temporary. Yes, Home Depot et al.
:
: I would co-ordinate the sewer line with the foundation work.
: Or, at least the part of it that will intrude on the foundation.
:
:Jim

Here's a couple of screen shots:

Disconnected drain:
http://fox302.com/userdata/Muse/file...cteddrain2.jpg

Jury rigged drain:
http://fox302.com/userdata/Muse/file...iggeddrain.jpg

Dan

HaHa! Excellent fix.
Good job.

Jim